Images are for reference only
KC5032A100.000C1GE00
+BOMXTAL OSC XO 100.0000MHZ CMOS SMD
-
ManufacturerKYOCERA AVX
-
Mfr. Part #KC5032A100.000C1GE00
-
In Stock14735
365 Days Quality Guarantee
7*24 hours service quarantee
90-day after-sales guarantee
Genuine Product Guarantee
Specifications
| Attribute | Value |
| Series | KC5032A-C1 |
| Part Status | Obsolete |
| Base Resonator | Crystal |
| Type | XO (Standard) |
| Frequency | 100 MHz |
| Function | Standby (Power Down) |
| Output | CMOS |
| Voltage - Supply | 1.6V ~ 3.63V |
| Frequency Stability | ±50ppm |
| Operating Temperature | -40°C ~ 85°C |
| Current - Supply (Max) | 19mA |
| Mounting Type | Surface Mount |
| Package / Case | 4-SMD, No Lead |
| Size / Dimension | 0.197" L x 0.126" W (5.00mm x 3.20mm) |
| Height - Seated (Max) | 0.047" (1.20mm) |
| Packaging | Cut Tape (CT), Tape & Reel (TR) |
Overview
Description
KC5032A100.000C1GE00 is a vendor part number, not a standard generic term. Based on the string:
- 5032 suggests the package size 5.0 x 3.2 mm, typical for MLCCs or small SMD components.
- A100.000 likely encodes the nominal value or frequency, but its exact meaning depends on the manufacturer (could be 100.000 pF for a capacitor or 100.000 MHz for a crystal/oscillator).
- C1GE likely denotes the dielectric/characteristics (often a Class 1 dielectric like NP0/C0G) and possibly termination or tolerance grade.
- 00 is usually a revision or lot code.
Because part-number conventions vary by vendor, the precise function (capacitor, resonator/crystal, etc.), voltage rating, tolerance, and temperature/specs must be verified in the manufacturer’s datasheet or catalog.
If you can share the supplier or context (capacitor, crystal, or module), I can give a precise, concise introduction and key specs.
- 5032 suggests the package size 5.0 x 3.2 mm, typical for MLCCs or small SMD components.
- A100.000 likely encodes the nominal value or frequency, but its exact meaning depends on the manufacturer (could be 100.000 pF for a capacitor or 100.000 MHz for a crystal/oscillator).
- C1GE likely denotes the dielectric/characteristics (often a Class 1 dielectric like NP0/C0G) and possibly termination or tolerance grade.
- 00 is usually a revision or lot code.
Because part-number conventions vary by vendor, the precise function (capacitor, resonator/crystal, etc.), voltage rating, tolerance, and temperature/specs must be verified in the manufacturer’s datasheet or catalog.
If you can share the supplier or context (capacitor, crystal, or module), I can give a precise, concise introduction and key specs.
Pinout
Pin count: 4 pins.
Functions: Vcc, Ground, Output (CLK_OUT), and Enable (EN, typically active-high). The device is enabled by tying EN high (to Vcc); EN can be used to disable the output when pulled low.
Functions: Vcc, Ground, Output (CLK_OUT), and Enable (EN, typically active-high). The device is enabled by tying EN high (to Vcc); EN can be used to disable the output when pulled low.
Application
KC5032A100.000C1GE00 is a 100.000 MHz crystal oscillator/clock source. Typical application areas include:
- Timing reference for digital ICs (CPU/SoC, FPGA/ASIC)
- High-speed interfaces (PCIe, USB, Ethernet, SGMII)
- Networking/telecom equipment (routers, switches, base stations)
- Data storage controllers
- Consumer electronics requiring precise clocks
- Test and measurement equipment
- Industrial automation and control
- Aerospace/defense clock distribution where robust timing is needed
- Timing reference for digital ICs (CPU/SoC, FPGA/ASIC)
- High-speed interfaces (PCIe, USB, Ethernet, SGMII)
- Networking/telecom equipment (routers, switches, base stations)
- Data storage controllers
- Consumer electronics requiring precise clocks
- Test and measurement equipment
- Industrial automation and control
- Aerospace/defense clock distribution where robust timing is needed
Package
Package type can’t be determined from the part number alone. Please share the vendor or refer to the KC5032A100.000C1GE00 datasheet/distributor page and check the Mechanical/Package data for the exact package designation (e.g., QFN, LQFP, BGA) and size.