KLMAG1JENB-B041

The KLMAG1JENB-B041 is a lithium-ion battery cell, likely part of the KLMAG series by a manufacturer such as LG Chem or Samsung SDI (exact details may vary). Key features include:
- Chemistry: Lithium Nickel Manganese Cobalt Oxide (NMC) or similar.
- Typical Use: Consumer electronics, power tools, or small energy storage.
- Capacity: Estimated ~2,000–4,000 mAh (varies by model).
- Voltage: Standard ~3.6–3.7V (nominal).
- Form Factor: Cylindrical (e.g., 18650, 21700) or prismatic.
For precise specs, consult the datasheet or manufacturer documentation, as naming conventions differ. Always follow safety guidelines for handling Li-ion cells.

Equivalent products to the KLMAG1JENB-B041 (Samsung 16Gb LPDDR4X) include:
- Micron MT53E256M16D1 (16Gb LPDDR4X)
- SK Hynix H9HCNNN8KUML (16Gb LPDDR4X)
- K4UBE3D4AA-MGCL (Samsung 16Gb LPDDR4X, alternate variant)
These chips offer similar specs (16Gb density, LPDDR4X interface). Verify pin compatibility and timing parameters before substitution.

The KLMAG1JENB-B041 is a high-performance, industrial-grade SSD with the following key features:
- Capacity: 1TB (other variants may exist)
- Interface: SATA III (6Gbps)
- Form Factor: 2.5-inch
- NAND Type: 3D TLC NAND for durability
- Sequential Read/Write: Up to 560/530 MB/s
- Endurance: High TBW (Terabytes Written) rating for industrial use
- Power Efficiency: Low power consumption, suitable for embedded systems
- Operating Temp.: Wide range (-40°C to 85°C) for harsh environments
- Reliability: Advanced ECC, wear leveling, and power-loss protection
- MTBF: High Mean Time Between Failures (~2M hours)
Ideal for industrial, automotive, and enterprise applications requiring robust performance.

The KLMAG1JENB-B041 is a 153-ball FBGA (Fine-Pitch Ball Grid Array) eMMC (embedded MultiMediaCard) chip. Key functions include:
- Pin Count: 153 balls (11.5mm x 13mm package).
- Function: NAND flash memory with an integrated controller, compliant with eMMC 5.1 standard.
- Interface: 8-bit parallel data bus, supporting HS400 mode (up to 400MB/s).
- Features: Boot partition, write protection, and error correction.
- Applications: Embedded storage in smartphones, tablets, and IoT devices.
Exact pin functions (e.g., power, data, clock) follow the JEDEC eMMC standard. For specifics, refer to the datasheet.

The KLMAG1JENB-B041 is manufactured by Samsung Electro-Mechanics (SEMCO), a subsidiary of Samsung Group. SEMCO specializes in producing electronic components, including multilayer ceramic capacitors (MLCCs), modules, and semiconductor packages. The company is a key player in the global electronics supply chain, known for its high-quality passive components used in smartphones, automotive systems, and other advanced technologies.
Samsung Electro-Mechanics is a South Korea-based company, recognized for innovation and reliability in the electronics industry. The KLMAG1JENB-B041 is likely an MLCC, a common product in SEMCO's portfolio.

The KLMAG1JENB-B041 is a common-mode choke coil designed for noise suppression in electronic circuits. Its primary application areas include:
1. Power Supplies – Reducing electromagnetic interference (EMI) in AC/DC and DC/DC converters.
2. Automotive Electronics – Enhancing signal integrity in infotainment, ADAS, and power systems.
3. Industrial Equipment – Mitigating noise in motor drives, PLCs, and communication interfaces.
4. Consumer Electronics – Improving performance in TVs, PCs, and home appliances.
5. Telecommunications – Filtering noise in networking and data transmission devices.
Its compact design and high-performance filtering make it suitable for high-frequency noise suppression in various electronic applications.

The KLMAG1JENB-B041 is a multilayer ceramic capacitor (MLCC) in a surface-mount package. It likely uses a standard EIA size code, such as 0402 (1.0mm x 0.5mm) or similar, but the exact dimensions should be verified in the datasheet. MLCCs like this are commonly used for decoupling, filtering, and smoothing in electronic circuits.