Specifications
| Attribute | Value |
| Supplier | Rochester Electronics, LLC |
| Package | Bulk |
| ProductStatus | Obsolete |
| Type | Zener |
| UnidirectionalChannels | 1 |
| Voltage-ReverseStandoff(Typ) | 1V (Max) |
| Voltage-Breakdown(Min) | 2.8V |
| Power-PeakPulse | 100W |
| PowerLineProtection | No |
| Applications | General Purpose |
| OperatingTemperature | 150°C (TJ) |
| MountingType | Surface Mount |
| Package/Case | TO-236-3, SC-59, SOT-23-3 |
Overview
Description
I don’t have a standard reference for RD3.0M-T1B-A. It looks like a model number for an electronic module (e.g., motor driver, regulator, or sensor) from a specific manufacturer. Without the vendor and category, I can’t give exact specs.
A concise intro would cover:
- What it is: device type and primary function
- Key specs: input voltage, current, outputs/communications, package
- Typical applications: robotics, automation, control systems
- How to use: basic hookup, control interface, safety notes
- Where to find more: datasheet, pinout, programming/ configuration
If you share the manufacturer name or a datasheet link, I’ll provide a precise, under-180-word introduction with the main specs and typical use cases.
A concise intro would cover:
- What it is: device type and primary function
- Key specs: input voltage, current, outputs/communications, package
- Typical applications: robotics, automation, control systems
- How to use: basic hookup, control interface, safety notes
- Where to find more: datasheet, pinout, programming/ configuration
If you share the manufacturer name or a datasheet link, I’ll provide a precise, under-180-word introduction with the main specs and typical use cases.
Pinout
Pin count: 2 pins.
Function: 2‑position, 3.0 mm pitch board‑to‑wire power connector (male half) used to supply power/data between a PCB and a harness.
Function: 2‑position, 3.0 mm pitch board‑to‑wire power connector (male half) used to supply power/data between a PCB and a harness.
Package
Cannot determine the package type from the model alone. RD3.0M-T1B-A requires the manufacturer/datasheet. Please share the vendor or a link, and I’ll confirm the actual package (e.g., SOP, TO-220, DPAK, etc.).
