74HCT04D
Toshiba Semiconductor and Storage
- Lifecycle
- Active
- Stock
- 4496 PCS
- Package
- SOIC-16
- Series
- Logic - Gates and Inverters
This in-depth comparison of the 74HCT04D and 74HCT221D,118 provides valuable insights into their specifications and key features. We cover important factors in detail, including RoHS compliance, REACH status, series, mounting style, package type, and other relevant characteristics. Presenting the differences side by side simplifies component selection, making it easier for you to select the best option for your specific application.
Replacement verdict
The 74HCT04D and 74HCT221D,118 are functionally distinct devices and cannot be used interchangeably. The 74HCT04D is a hex inverting gate, while the 74HCT221D,118 is a dual monostable multivibrator with Schmitt-trigger inputs. Their logic functions, pin configurations, and application roles differ fundamentally, making direct substitution impossible without circuit redesign.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | 74HCT04D | 74HCT221D,118 | Why it matters |
|---|---|---|---|
| Logic Function | Hex Inverter | Dual Monostable Multivibrator | The logic function defines the fundamental operation; these devices perform completely different functions and are not functionally substitutable. |
| Number of Circuits | 6 | 2 | The number of independent channels determines how many signals can be processed simultaneously. |
| Number of Inputs per Circuit | 1 | 2 (trigger inputs) | Input count affects how the device interfaces with surrounding logic and the complexity of the control signals required. |
| Number of Outputs per Circuit | 1 | 2 (Q and Qbar) | Output configuration determines available signal polarities and fan-out options for downstream circuitry. |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | Both are HCT-family devices designed for 5 V TTL-compatible systems, so they share the same supply requirements. |
| Logic Family | HCT | HCT | The logic family determines input threshold compatibility with TTL and CMOS signal levels. |
| Output Type | CMOS (push-pull) | CMOS (push-pull) | Output drive type affects the ability to drive loads and interface with other logic stages. |
| Mounting Type | Surface Mount | Surface Mount | Mounting type must match the PCB assembly process and available board space. |
| Package / Case | SOIC-14 | SOIC-16 | Package footprint and pin count must match the PCB layout; different pin counts prevent direct drop-in replacement. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C | The temperature range defines the environments in which the device can reliably operate. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | 74HCT04D | 74HCT221D,118 |
|---|---|---|
| Supplier | - | Nexperia USA Inc. |
| Series | 74HCT | 74HCT |
| Part Status | Active | Active |
| Logic Type | Inverter | Monostable |
| Independent Circuits | - | 2 |
| Schmitt Trigger Input | - | Yes |
| Propagation Delay | - | 31 ns |
| Current - Output High Low | 4mA, 4mA | 4mA, 4mA |
| Voltage - Supply | 4.5V ~ 5.5V | 4.5 V ~ 5.5 V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
| Number of Circuits | 6 | - |
| Number of Inputs | 1 | - |
| Current - Quiescent (Max) | 1 µA | - |
| Logic Level - Low | 0.8V | - |
| Logic Level - High | 2V | - |
| Max Propagation Delay @ V Max CL | 16ns @ 5.5V, 50pF | - |
The 74HCT04D is a hex inverter containing six independent NOT gates, each providing a single logic inversion. The 74HCT221D,118 is a dual monostable multivibrator (one-shot) with Schmitt-trigger inputs, designed to generate output pulses of a defined width when triggered. They serve fundamentally different logic functions and are not functionally interchangeable.
No. The 74HCT04D is typically supplied in a 14-pin SOIC package with a standard hex-inverter pinout (inputs on pins 1, 3, 5, 9, 11, 13; outputs on pins 2, 4, 6, 8, 10, 12; VCC on pin 14; GND on pin 7). The 74HCT221D,118 is supplied in a 16-pin SOIC package with a different pinout that includes trigger, reset, and timing pins. They cannot be dropped into the same PCB footprint.
No. The 74HCT04D is a combinational logic inverter and has no internal timing or monostable function. The 74HCT221D,118 requires external timing components (R and C) to set pulse width and provides retriggerable/non-retriggerable one-shot operation. A simple inverter cannot replicate the monostable timing behavior without additional external circuitry.
Yes. Both the 74HCT04D and the 74HCT221D,118 are HCT-family devices specified for a nominal 5 V supply, with a recommended operating supply voltage range of 4.5 V to 5.5 V. They are also characterized for operation over the standard industrial temperature range of -40 °C to +85 °C (or +125 °C depending on the specific manufacturer variant).
The 74HCT04D has standard CMOS-compatible input thresholds referenced to VCC (typically 1.4 V at 5 V). The 74HCT221D,118 features Schmitt-trigger inputs on its trigger inputs, providing defined positive-going and negative-going threshold voltages with hysteresis, which improves noise immunity for slow or noisy input edges. This is a key difference when interfacing with analog or slow-rising signals.
The 74HCT221D,118 is better suited for switch debouncing because its monostable function can generate a single clean output pulse of defined width from a noisy or bouncing input, and its Schmitt-trigger inputs add hysteresis. The 74HCT04D can be used in a simple RC debounce network, but it does not provide the same level of noise immunity or precise pulse-width control without additional components.
Both devices are HCT-family logic and typically provide standard CMOS output drive. The 74HCT04D is commonly specified with ±4 mA output drive at 5 V. The 74HCT221D,118 is also typically specified with ±4 mA output drive. However, exact drive currents can vary by manufacturer, so the specific datasheet for the ordered part number should be consulted for guaranteed limits.
No. The 74HCT221D,118 is a monostable multivibrator, not an inverter. While it contains internal logic that may invert signals as part of its timing function, it cannot be configured to act as a simple combinational NOT gate. Using it as an inverter would require external timing components and would produce a pulse output rather than a continuous inverted logic level.