74HCT08D vs 74HCT240D

This in-depth comparison of the 74HCT08D and 74HCT240D provides valuable insights into their specifications and key features. We cover important factors in detail, including RoHS compliance, REACH status, series, mounting style, package type, and other relevant characteristics. Presenting the differences side by side simplifies component selection, making it easier for you to select the best option for your specific application.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The 74HCT08D and 74HCT240D are not functionally interchangeable despite sharing the same 74HCT logic family and SO14 package. The 74HCT08D provides four 2-input AND gates with active-high push-pull outputs, whereas the 74HCT240D is an octal buffer/line driver with 3-state inverting outputs and dual active-low output enable pins. The differences in logic function, channel count, output type, and control interface make direct substitution impossible without redesigning the surrounding circuit.

Different logic function Different channel count Different output type Different control interface

Parts at a glance

Part A

74HCT08D

Toshiba Semiconductor and Storage

Lifecycle
Active
Stock
6154 PCS
Package
SOIC-14
Series
Logic - Gates and Inverters
Part B

74HCT240D

Toshiba Semiconductor and Storage

Lifecycle
Active
Stock
7637 PCS
Package
SOIC-20
Series
Logic - Buffers, Drivers, Receivers, Transceivers

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter 74HCT08D 74HCT240D Why it matters
Logic Function Quad 2-input AND gate Octal inverting buffer/line driver with 3-state outputs The logic function determines the fundamental signal operation; these parts are not functionally interchangeable.
Number of Gates / Channels 4 8 Channel count affects how many independent signals can be processed per package.
Output Type Push-pull (totem-pole) 3-state (tri-state) 3-state outputs allow bus sharing, while push-pull outputs cannot be tied together.
Inputs per Channel 2 1 AND gates require two inputs per channel, whereas buffers have a single input per channel.
Output Drive Current (IOH/IOL) ±4 mA ±6 mA Drive current determines the ability to source or sink current for connected loads.
Propagation Delay (tPD) Typ. 12 ns Typ. 13 ns Propagation delay affects maximum operating speed and timing margins in a circuit.
Package SO14 (14-pin SOIC) SO20 (20-pin SOIC) Package footprint and pin count must match the PCB layout for physical compatibility.
Pin Count 14 20 Different pin counts mean the devices are not drop-in replacements on the same footprint.
Enable / Control Pins None Two active-low output enable pins (1OE, 2OE) Enable pins control output activation and high-impedance state, which is essential for bus applications.
Supply Voltage Range 4.5 V to 5.5 V 4.5 V to 5.5 V Both are HCT-family devices designed for 5 V TTL-compatible systems.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification 74HCT08D 74HCT240D
Supplier - Toshiba Semiconductor and Storage
Series 74HCT 74HCT
Part Status Obsolete Active
Logic Type AND Gate Buffer, Inverting
Number of Elements - 2
Number of Bits per Element - 4
Output Type - 3-State
Current - Output High Low 4mA, 4mA 6mA, 6mA
Voltage - Supply 4.5V ~ 5.5V 4.5V ~ 5.5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C (TA)
Mounting Type Surface Mount Surface Mount
Number of Circuits 4 -
Number of Inputs 2 -
Current - Quiescent (Max) 1 µA -
Logic Level - Low 0.8V -
Logic Level - High 2V -
Max Propagation Delay @ V Max CL 18ns @ 5.5V, 50pF -

Frequently asked questions

What are the primary functional differences between the 74HCT08D and the 74HCT240D?

The 74HCT08D contains four independent 2-input AND gates, providing a logic output based on the combination of two inputs. The 74HCT240D is an octal buffer/line driver with 3-state outputs, designed to drive bus lines or buffer memory address registers. The 74HCT240D also features inverting outputs, whereas the 74HCT08D provides non-inverted logic outputs.

Are the 74HCT08D and 74HCT240D pin-compatible?

No. The 74HCT08D is typically housed in a 14-pin SOIC package, while the 74HCT240D is housed in a 20-pin SOIC package. They have different pin counts, pin assignments, and functions, so they are not pin-to-pin compatible.

Can the 74HCT08D be used as a direct substitute for the 74HCT240D in a bus-driving application?

No. The 74HCT240D is specifically designed as a 3-state octal buffer/line driver with inverting outputs and high drive capability, suitable for bus interfacing. The 74HCT08D provides AND gate logic with standard push-pull outputs and does not have 3-state control, so it cannot perform the bus-driving and isolation functions of the 74HCT240D.

What are the output drive capabilities of the 74HCT08D and 74HCT240D?

Both devices are HCT-type CMOS logic, typically specified with symmetrical output drive of ±4 mA at 5 V. However, the 74HCT240D is characterized for bus-driving applications and may have specified drive currents suitable for driving transmission lines, while the 74HCT08D is intended for general logic interfacing. Always verify the exact drive current from the manufacturer datasheet for the specific part number.

Do both devices operate at the same supply voltage and logic levels?

Yes. Both the 74HCT08D and 74HCT240D are HCT-family devices, operating from a 4.5 V to 5.5 V supply and featuring TTL-compatible input thresholds. They are designed for 5 V systems and can interface directly with TTL logic levels.

What is the difference in propagation delay between the 74HCT08D and 74HCT240D?

Propagation delay depends on the specific manufacturer and test conditions. In general, both HCT devices have similar propagation delays in the range of a few nanoseconds to low tens of nanoseconds at 5 V. For precise timing, consult the respective manufacturer datasheets, as the 74HCT240D may have slightly different delay specifications due to its buffer/driver architecture.

Can the 74HCT240D be used to replace the 74HCT08D for AND logic functions?

No. The 74HCT240D is an inverting buffer/line driver, not an AND gate. It cannot perform logical AND operations. Additionally, its 3-state outputs require enable control, which is not present in the 74HCT08D. Using the 74HCT240D in place of an AND gate would require external logic and would not be a direct replacement.

What are the typical applications for each device?

The 74HCT08D is commonly used for general-purpose logic gating, signal combining, and control logic in digital systems. The 74HCT240D is typically used as a bus buffer, line driver, or memory address driver in microprocessor systems, where 3-state outputs and high drive strength are required.