AD534TD
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 7469 PCS
- Series
- Linear - Analog Multipliers, Dividers
This in-depth comparison of the AD534TD and AD534JDZ provides valuable insights into their specifications and key features. We cover important factors in detail, including RoHS compliance, REACH status, series, mounting style, package type, and other relevant characteristics. Presenting the differences side by side simplifies component selection, making it easier for you to select the best option for your specific application.
Replacement verdict
The AD534TD and AD534JDZ are functionally equivalent analog multipliers from the same AD534 series, sharing identical transfer characteristics, input/output voltage ranges, and operating temperature range. The primary distinction lies in package grade and temperature screening, with the AD534TD specified over the full military temperature range while the AD534JDZ is rated for commercial temperature operation. Both devices are pin-compatible and can serve as functional replacements in most applications, provided the operating temperature requirements of the target design are satisfied.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD534TD | AD534JDZ | Why it matters |
|---|---|---|---|
| Operating Temperature Range | -55°C to +125°C | 0°C to +70°C | Defines the environments where the part can reliably operate; the TD grade supports military/industrial extremes while the JDZ grade is limited to commercial temperatures. |
| Package / Case | 14-Lead TO-116 (Ceramic Side-Brazed DIP) | 14-Lead PDIP (Plastic DIP) | Package type affects thermal performance, hermeticity, board footprint, and suitability for harsh or high-reliability environments. |
| Temperature Grade / Screening | Military/Industrial grade, hermetically sealed | Commercial grade | Screening level determines reliability assurance, moisture sensitivity, and qualification for aerospace, defense, or industrial use. |
| Total Error (Nonlinearity + Offset) at 25°C | ±0.25% max (TD grade) | ±0.25% max (J grade) | Specifies worst-case accuracy of the analog multiplier/divider; matching values indicate comparable precision at room temperature. |
| Supply Voltage Range | ±8 V to ±18 V | ±8 V to ±18 V | Determines compatibility with system power rails; identical ranges allow drop-in use in the same supply architecture. |
| Input Offset Voltage (max) | ±1.0 mV (TD grade) | ±2.0 mV (J grade) | Lower offset improves DC accuracy in multiplication, division, and modulation applications. |
| Input Bias Current (max) | ±1.0 µA | ±2.0 µA | Bias current affects errors when driven from high-impedance sources; lower bias current yields better accuracy. |
| Bandwidth (Small Signal) | 1 MHz typical | 1 MHz typical | Determines maximum signal frequency for multiplication/division; identical bandwidth means equivalent dynamic performance. |
| RoHS Compliance | Not RoHS compliant (contains lead) | RoHS compliant (Z suffix) | RoHS status affects regulatory compliance for commercial products and may restrict use of the TD grade in consumer markets. |
| Function | Analog multiplier/divider | Analog multiplier/divider | Confirms both parts perform the same core signal-processing function, enabling functional substitution where environmental specs allow. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD534TD | AD534JDZ |
|---|---|---|
| Supplier | - | Analog Devices Inc. |
| Part Status | Discontinued at DigiKey | Active |
| Function | Analog Multiplier/Divider | Analog Multiplier/Divider |
| Number of Bits / Stages | 4-Quadrant | 4-Quadrant |
| Base Product Number | AD534 | - |
| Packaging | Tube | - |
The AD534TD and AD534JDZ are both analog multipliers from Analog Devices, but they differ in operating temperature range and package. The AD534TD is specified for the extended industrial/military temperature range of -55°C to +125°C and is housed in a 14-lead TO-116 (ceramic) package. The AD534JDZ is specified for the commercial temperature range of 0°C to +70°C and is housed in a 14-lead PDIP (plastic) package. Both provide the same multiplier/divider function and similar electrical performance at 25°C.
Functionally, both devices perform analog multiplication, division, squaring, and square rooting with the same transfer function and pinout. However, they are not drop-in replacements for each other in all applications because the AD534TD supports a wider operating temperature range and uses a ceramic package, while the AD534JDZ is limited to commercial temperatures and uses a plastic package. Circuit performance at temperature extremes may differ, so substitution should be validated against the specific application requirements.
The AD534TD is supplied in a 14-lead TO-116 hermetic ceramic package. The AD534JDZ is supplied in a 14-lead PDIP (plastic dual in-line) package. Both have the same pin count and pin functions, but the package materials and thermal characteristics differ.
The AD534TD is rated for operation over the -55°C to +125°C temperature range. The AD534JDZ is rated for operation over the 0°C to +70°C temperature range. These ranges are specified in the Analog Devices AD534 datasheet.
Both devices share the same basic accuracy grades at 25°C, including total error and nonlinearity specifications as defined in the AD534 datasheet. However, the AD534TD maintains its specified accuracy over the full -55°C to +125°C range, while the AD534JDZ accuracy is specified only over 0°C to +70°C. Therefore, the AD534TD is the appropriate choice for applications requiring guaranteed performance over extended temperatures.
No. The AD534JDZ is a commercial-grade device with a 0°C to +70°C temperature range and a plastic package, so it does not meet the environmental and temperature requirements typically associated with military or extended industrial applications. The AD534TD, with its -55°C to +125°C range and hermetic ceramic package, is the correct choice for those conditions.
Both devices operate from dual supplies, typically ±15 V, with a specified range of ±8 V to ±18 V as stated in the Analog Devices AD534 datasheet. The power supply requirements are identical for both the AD534TD and AD534JDZ.
The AD534JDZ is available in a RoHS-compliant plastic PDIP package, as indicated by the "Z" suffix in the part number. The AD534TD is a hermetic ceramic package and is not typically offered as RoHS compliant due to the package materials and sealing process. Designers should verify the specific ordering code and compliance status with Analog Devices or authorized distributors.