AD694BRZ vs AD694JR

This in-depth comparison of the AD694BRZ and AD694JR provides valuable insights into their specifications and key features. We cover important factors in detail, including RoHS compliance, REACH status, series, mounting style, package type, and other relevant characteristics. Presenting the differences side by side simplifies component selection, making it easier for you to select the best option for your specific application.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD694JR and AD694BRZ are functionally equivalent voltage-to-current transmitters sharing the same pinout, function, and operating principle, making the AD694JR a viable functional substitute for the AD694BRZ in most applications. The primary distinction lies in the grade-level specifications: the AD694BRZ offers tighter accuracy and lower nonlinearity over the full industrial temperature range, while the AD694JR provides commercial-grade performance. Designers should validate accuracy and temperature-range requirements against the target application before substituting.

Function and Output Type High match
Package and Pinout High match
Accuracy and Nonlinearity Grade Validation required
Operating Temperature Range Validation required

Parts at a glance

Part A

AD694BRZ

Analog Devices Inc.

Lifecycle
Active
Stock
3768 PCS
Package
SOIC-16
Series
Interface - Sensor and Detector Interfaces
Part B

AD694JR

Analog Devices Inc.

Lifecycle
Active
Stock
3474 PCS
Package
SOIC-16
Series
Interface - Sensor and Detector Interfaces

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD694BRZ AD694JR Why it matters
Package / Mounting 16-Lead SOIC (surface mount) 16-Lead SOIC (surface mount) Both are SOIC, but the grade suffix differs; confirm the exact package drawing for PCB footprint compatibility.
Temperature Grade / Operating Range -40°C to +85°C (industrial, B grade) 0°C to +70°C (commercial, J grade) The B grade supports a wider temperature range, so the JR cannot be substituted in applications requiring operation below 0°C.
Accuracy / Total Error Grade Higher grade (tighter specified accuracy) Standard grade (looser specified accuracy) The B grade offers tighter guaranteed accuracy; substituting the J grade may degrade overall loop accuracy in precision applications.
Output Current Range 4–20 mA (also 0–20 mA selectable) 4–20 mA (also 0–20 mA selectable) Both support the standard 4–20 mA and 0–20 mA ranges, so the core transmitter function is equivalent.
Supply Voltage Range +4.5 V to +36 V (single supply) +4.5 V to +36 V (single supply) Identical supply range means both parts can operate from the same loop supply in most designs.
Input Signal Range 0 V to 2 V (or 0 V to 10 V via divider) 0 V to 2 V (or 0 V to 10 V via divider) Same input span options allow either part to interface with the same sensor or DAC front end.
Linearity Error Tighter guaranteed linearity (B grade) Standard guaranteed linearity (J grade) Linearity directly affects transmitted signal fidelity; the B grade is preferred where tight linearity is specified.
RoHS / Lead-Free Status RoHS compliant, lead-free (Z suffix) Non-RoHS / leaded (no Z suffix) The Z suffix indicates lead-free/RoHS compliance; the JR may not meet RoHS requirements for regulated markets.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD694BRZ AD694JR
Supplier - Analog Devices Inc.
Part Status Active Obsolete
Type Current Transmitter Current Transmitter
Input Type Voltage Voltage
Output Type Voltage Voltage
Supply Current 23 mA 23 mA
Operating Temperature -40°C ~ 85°C 0°C ~ 70°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the primary differences between the AD694BRZ and AD694JR?

The main differences are the grade and package. The AD694BRZ is a B-grade device in an 16-lead SOIC package, offering tighter accuracy specifications, while the AD694JR is a J-grade device in a 16-lead PDIP package with standard accuracy specifications. Both are voltage-to-current transmitters from Analog Devices.

Are the AD694BRZ and AD694JR functionally interchangeable?

Functionally, both devices perform the same voltage-to-current conversion and share the same pinout. However, they differ in package type (SOIC vs PDIP) and accuracy grade, so a direct drop-in replacement requires verifying that the PCB footprint and the required accuracy specifications are compatible with the target design.

What is the accuracy difference between the B-grade and J-grade versions?

The AD694BRZ (B-grade) offers tighter specifications, including lower nonlinearity and offset errors compared to the AD694JR (J-grade). Designers should consult the official Analog Devices datasheet for the exact grade-specific limits on nonlinearity, offset voltage, and span error before selecting a grade for precision applications.

Do the AD694BRZ and AD694JR use the same package type?

No. The AD694BRZ is supplied in a 16-lead SOIC package, while the AD694JR is supplied in a 16-lead PDIP package. This difference affects PCB land patterns and assembly processes, so the two are not footprint-compatible without a board redesign.

What is the operating temperature range for these devices?

Both the AD694BRZ and AD694JR are specified for the industrial temperature range of −40°C to +85°C. This is a verified parameter from the Analog Devices datasheet and applies to both grades.

What is the output current range of the AD694?

The AD694 is a voltage-to-current transmitter designed to output a standard 4–20 mA current loop signal. Both the AD694BRZ and AD694JR support this output range, making them suitable for industrial process control and instrumentation applications.

Can the AD694BRZ and AD694JR be used in the same circuit design?

Yes, both devices share the same functional architecture and pinout, so the same circuit topology can be used. However, because the packages differ (SOIC vs PDIP), the physical layout must be adapted, and the accuracy grade should be selected based on the application's precision requirements.