AD7495BRZ
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 2494 PCS
- Package
- SOIC-8
- Series
- Data Acquisition - Analog to Digital Converters (ADC)
This in-depth comparison of the AD7495BRZ and AD7492BR-5 provides valuable insights into their specifications and key features. We cover important factors in detail, including RoHS compliance, REACH status, series, mounting style, package type, and other relevant characteristics. Presenting the differences side by side simplifies component selection, making it easier for you to select the best option for your specific application.
Replacement verdict
The AD7495BRZ and AD7492BR-5 are both 12-bit successive-approximation ADCs from Analog Devices sharing a compatible SOIC-24 footprint and parallel interface architecture, making the AD7495BRZ a viable functional replacement candidate for the AD7492BR-5 in many designs. However, the two parts differ in analog supply voltage range and achievable throughput, so the replacement should be validated against the target system's supply rail and sampling-rate requirements before adoption.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD7495BRZ | AD7492BR-5 | Why it matters |
|---|---|---|---|
| Resolution | 12 bit | 12 bit | Both converters provide 12-bit resolution, so quantization accuracy is equivalent for signal-chain design. |
| Sampling Rate | 1 MSPS | 400 kSPS | The AD7495 supports a much higher throughput, which matters for wideband or fast-settling acquisition systems. |
| Number of Input Channels | 1 (single-ended) | 1 (single-ended) | Both are single-channel devices, so channel-count requirements are identical for either part. |
| Supply Voltage | 5 V single supply | 5 V single supply | Identical supply requirements allow either part to be used in the same 5 V rail design. |
| Interface Type | SPI / QSPI / MICROWIRE / DSP compatible serial | Parallel (byte/word) | The interface differs fundamentally: the AD7495 uses a serial bus while the AD7492 uses a parallel bus, affecting pinout, PCB routing, and host controller selection. |
| Package / Pin Count | 8-lead SOIC | 24-lead SOIC | Different package sizes and pin counts mean the parts are not footprint-compatible and require different board layouts. |
| Power Consumption | ~4.5 mW typical at 1 MSPS | ~15 mW typical | Lower power in the AD7495 benefits battery-powered and thermally constrained designs. |
| Integral Nonlinearity (INL) | ±1 LSB max | ±1 LSB max | Equivalent INL specifications indicate comparable DC linearity performance for precision measurement applications. |
| Reference Type | Internal reference | Internal reference | Both integrate an on-chip reference, simplifying system design and reducing external component count. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD7495BRZ | AD7492BR-5 |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Number of Bits | 12 | 12 |
| Sampling Rate(Per Second) | 1M | 1.25M |
| Data Interface | SPI, DSP | Parallel |
| Number of A/D Converters | 1 | 1 |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Number of Inputs | 1 | - |
| Input Type | Single Ended | - |
| Configuration | S/H-ADC | - |
| Ratio - S / H: ADC | 1:1 | - |
| Architecture | SAR | - |
| Reference Type | External | - |
| Voltage - Supply, Analog | 2.7V ~ 5.25V | - |
| Voltage - Supply, Digital | 2.7V ~ 5.25V | - |
The AD7495BRZ is a 12-bit successive-approximation ADC that operates from a single 2.7 V to 5.25 V supply and includes an on-chip reference, while the AD7492BR-5 is a 12-bit SAR ADC specified for a 5 V supply that requires an external reference. Both are offered in 24-lead SOIC packages, but their reference architecture and supply requirements differ.
Yes. Both devices are 12-bit successive-approximation ADCs with a maximum throughput rate of 1 MSPS, making them comparable in resolution and conversion speed.
Not without validation. The AD7495BRZ integrates an internal reference and supports a 2.7 V to 5.25 V supply range, whereas the AD7492BR-5 is a 5 V device requiring an external reference. Reference configuration, supply voltage, and associated external components must be verified against the datasheets before any substitution.
The AD7495BRZ operates from a single supply of 2.7 V to 5.25 V. The AD7492BR-5 is specified for operation from a 5 V supply.
The AD7495BRZ includes an on-chip reference, reducing external component count. The AD7492BR-5 does not include an internal reference and requires an external reference voltage to be applied for conversion.
Both devices are offered in a 24-lead SOIC package, which supports similar PCB footprint considerations, though pin functions and external connections should be confirmed from the respective datasheets.
Both ADCs provide a serial digital interface for connection to microcontrollers and DSPs, supporting straightforward integration into embedded data-acquisition systems.