AD7656YSTZ
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 7772 PCS
- Package
- LQFP-64
- Series
- Data Acquisition - Analog to Digital Converters (ADC)
This in-depth comparison of the AD7656YSTZ and AD7655AST provides valuable insights into their specifications and key features. We cover important factors in detail, including RoHS compliance, REACH status, series, mounting style, package type, and other relevant characteristics. Presenting the differences side by side simplifies component selection, making it easier for you to select the best option for your specific application.
Replacement verdict
The AD7656YSTZ and AD7655AST are not drop-in replacements for one another. The AD7656YSTZ is a 6-channel, 16-bit simultaneous-sampling bipolar ADC in a 64-lead LQFP package, while the AD7655AST is a 4-channel, 16-bit ADC in a 48-lead LQFP package with a different analog input architecture and channel count. The differences in channel count, package footprint, input configuration, and digital interface make direct substitution impractical without a board redesign and firmware changes.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD7656YSTZ | AD7655AST | Why it matters |
|---|---|---|---|
| Number of ADC Channels | 6 | 4 | Determines how many independent analog signals can be sampled simultaneously; a direct constraint on system channel count. |
| Resolution | 16 bits | 16 bits | Sets the quantization step and achievable dynamic range; both are 16-bit, so resolution is equivalent. |
| Sampling Rate (max) | 250 kSPS | 1 MSPS | Maximum throughput per channel; affects the bandwidth of signals that can be digitized and overall system speed. |
| Architecture | SAR | SAR | Converter topology influences latency, power, and interface behavior; both use SAR, so timing characteristics are similar in nature. |
| Input Type | Single-ended (true bipolar) | Pseudo-differential | Defines how signals connect to the ADC and the achievable common-mode rejection; affects front-end design and sensor interfacing. |
| Supply Voltage | 5 V analog (AVDD), 5 V digital (DVDD) | 5 V analog (AVDD), 5 V digital (DVDD) | Determines power rail requirements and compatibility with surrounding logic; identical rails simplify substitution. |
| Interface | Parallel / Serial (SPI-compatible) | Parallel | Defines how the host reads conversion results; a serial option on one part but not the other affects board routing and controller selection. |
| Package | 64-lead LQFP | 48-lead LQFP | Footprint and pin count must match the PCB layout; different packages require board redesign for substitution. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +85 °C | Defines the environments in which the part is guaranteed to meet specifications; affects suitability for industrial or automotive use. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD7656YSTZ | AD7655AST |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Series | iCMOS® | PulSAR® |
| Part Status | Active | Obsolete |
| Number of Bits | 16 | 16 |
| Sampling Rate(Per Second) | 250k | 1M |
| Number of A/D Converters | 6 | 1 |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 85°C |
| Number of Inputs | 6 | - |
| Input Type | Single Ended | - |
| Data Interface | SPI, Parallel, DSP | - |
| Configuration | S/H-ADC | - |
| Ratio - S / H: ADC | 1:1 | - |
| Architecture | SAR | - |
| Reference Type | External, Internal | - |
| Voltage - Supply, Analog | 5V | - |
| Voltage - Supply, Digital | 5V | - |
| Features | Simultaneous Sampling, True Bipolar | - |
The AD7656YSTZ is a 16-bit, 6-channel simultaneous-sampling SAR ADC with a 250 kSPS throughput rate, while the AD7655AST is a 16-bit, 4-channel simultaneous-sampling SAR ADC with a 500 kSPS throughput rate. The AD7656YSTZ offers more input channels, whereas the AD7655AST provides a higher per-channel sampling rate.
No. The AD7656YSTZ is supplied in a 64-lead LQFP package, while the AD7655AST is supplied in a 48-lead LQFP package. The different lead counts and pin assignments mean the two devices are not pin-compatible and cannot be dropped into the same PCB footprint.
Both devices are 16-bit successive-approximation-register (SAR) ADCs featuring simultaneous sampling of all input channels. The AD7656YSTZ samples six channels simultaneously, and the AD7655AST samples four channels simultaneously, making both suited to multi-phase power monitoring and motor control applications.
The AD7656YSTZ provides a maximum throughput of 250 kSPS, while the AD7655AST provides a maximum throughput of 500 kSPS. The AD7655AST therefore delivers twice the per-conversion rate of the AD7656YSTZ, at the cost of two fewer input channels.
Both the AD7656YSTZ and the AD7655AST support bipolar analog input ranges of ±10 V and ±5 V, which allows direct interfacing to industrial-level signals without external signal conditioning in many designs.
Both devices provide a parallel digital interface for connection to a host processor or DSP, along with a serial interface option. The AD7656YSTZ additionally supports a high-speed parallel interface with a word/byte mode, and both parts are designed for direct connection to standard microprocessors and DSPs.
No. The AD7655AST has four channels versus six on the AD7656YSTZ, a different package and pinout (48-lead versus 64-lead LQFP), and a different maximum throughput rate. A direct replacement is not possible without redesigning the PCB footprint and revalidating the channel count and timing requirements against the manufacturer datasheets.