AD8009ARZ vs AD8002AR

This in-depth comparison of the AD8009ARZ and AD8002AR provides valuable insights into their specifications and key features. We cover important factors in detail, including RoHS compliance, REACH status, series, mounting style, package type, and other relevant characteristics. Presenting the differences side by side simplifies component selection, making it easier for you to select the best option for your specific application.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD8009ARZ and AD8002AR are both high-speed current-feedback operational amplifiers from Analog Devices in the same 8-lead SOIC package, sharing a comparable supply voltage range and similar bandwidth class. However, they differ in channel count and key AC specifications, so the AD8002AR can serve as a functional candidate only after validating the dual-channel configuration, gain-bandwidth requirements, and slew-rate margins against the target application.

Channel Count Validation required
Package Type High match
Bandwidth Validation required
Slew Rate Validation required

Parts at a glance

Part A

AD8009ARZ

Analog Devices Inc.

Lifecycle
Active
Stock
2368 PCS
Package
SOIC-8
Series
Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps
Part B

AD8002AR

Analog Devices Inc.

Lifecycle
Active
Stock
2601 PCS
Package
SOIC-8
Series
Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8009ARZ AD8002AR Why it matters
Number of Amplifiers 1 2 A single vs. dual channel count determines board layout, package footprint, and whether one part can replace two separate amplifiers in a design.
-3 dB Bandwidth 1 GHz (G = +2) 600 MHz (G = +1) Bandwidth defines the maximum signal frequency the amplifier can pass with acceptable gain, directly affecting high-speed signal fidelity.
Slew Rate 5500 V/µs 1200 V/µs Slew rate limits how fast the output can respond to large signal steps; higher slew rate supports faster large-signal transitions and lower distortion at high frequencies.
Supply Voltage Range ±5 V to ±6 V (dual supply) ±5 V to ±15 V (dual supply) The allowable supply range determines compatibility with the system power rails and output voltage swing headroom.
Supply Current per Amplifier 16 mA typ 7.5 mA typ Quiescent current affects power budget and thermal design, especially in multi-channel or battery-powered systems.
Input Voltage Noise 1.1 nV/√Hz 2.0 nV/√Hz Lower input voltage noise improves signal-to-noise ratio in low-level signal amplification and precision front-end applications.
Package 8-Lead SOIC 8-Lead SOIC Package compatibility affects whether the parts are drop-in replacements on an existing PCB footprint.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C The temperature range must cover the application environment to ensure reliable operation and specified performance.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8009ARZ AD8002AR
Supplier - Analog Devices Inc.,Rochester Electronics, LLC
Part Status Active Obsolete
Amplifier Type Current Feedback Current Feedback
Number of Circuits 1 2
Slew Rate 5500V/µs 1200V/µs
-3 dB Bandwidth 1 GHz 600 MHz
Current - Input Bias 50 µA 5 µA
Voltage - Input Offset 2 mV 2 mV
Supply Current 16mA 10mA (x2 Channels)
Current - Output / Channel 175 mA 70 mA
Voltage - Supply Span(Min) 5 V 6 V
Voltage - Supply Span(Max) 12 V 12 V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the primary differences between the AD8009ARZ and the AD8002AR?

The AD8009ARZ is a single, ultra-high-speed current feedback amplifier with a 5.5 GHz gain bandwidth product and 5,500 V/µs slew rate, optimized for high-speed signal processing. The AD8002AR is a dual, low-power current feedback amplifier with a 600 MHz bandwidth (G = +1) and 1,200 V/µs slew rate, designed for dual-channel applications where power efficiency is critical. The AD8009ARZ comes in an 8-lead SOIC package, while the AD8002AR is offered in an 8-lead SOIC package as well, but houses two independent amplifiers.

Can the AD8009ARZ be used as a direct replacement for the AD8002AR?

No, they are not pin-compatible or functionally equivalent. The AD8009ARZ is a single amplifier, whereas the AD8002AR is a dual amplifier. Their pinouts differ, and the AD8009ARZ requires a higher supply current (14 mA typical) compared to the AD8002AR (6.5 mA typical per amplifier). A direct substitution without circuit redesign is not recommended.

What are the typical supply voltage and power consumption specifications for these amplifiers?

The AD8009ARZ operates on a dual supply of ±5 V (or single +10 V) with a typical quiescent current of 14 mA. The AD8002AR operates on a dual supply of ±5 V (or single +10 V) with a typical quiescent current of 6.5 mA per amplifier (13 mA total for the dual). Both are specified over the industrial temperature range of −40°C to +85°C.

Which applications are best suited for the AD8009ARZ versus the AD8002AR?

The AD8009ARZ is ideal for high-speed data acquisition, video signal processing, and pulse amplifiers where a 5.5 GHz gain bandwidth and 5,500 V/µs slew rate are required. The AD8002AR is better suited for portable instrumentation, dual-channel active filters, and low-power video distribution systems where two matched amplifiers and lower power consumption are prioritized.

What are the package and pin configuration differences between the AD8009ARZ and AD8002AR?

Both devices are offered in 8-lead SOIC packages. The AD8009ARZ (single) uses pins 1, 5, and 8 for offset null, pins 2 and 3 for inverting and non-inverting inputs, pin 4 for negative supply, pin 7 for positive supply, and pin 6 for output. The AD8002AR (dual) uses pins 1, 2, and 3 for amplifier A (output, inverting input, non-inverting input), pin 4 for negative supply, pins 5, 6, and 7 for amplifier B (non-inverting input, inverting input, output), and pin 8 for positive supply. The pinouts are not interchangeable.

How do the bandwidth and slew rate specifications compare between the AD8009ARZ and AD8002AR?

The AD8009ARZ offers a gain bandwidth product of 5.5 GHz and a slew rate of 5,500 V/µs, making it significantly faster. The AD8002AR provides a −3 dB bandwidth of 600 MHz (G = +1) and a slew rate of 1,200 V/µs. These differences make the AD8009ARZ preferable for ultra-high-speed pulse and RF applications, while the AD8002AR is adequate for standard video and instrumentation bandwidths.

Are the AD8009ARZ and AD8002AR specified for the same operating temperature range?

Yes, both the AD8009ARZ and AD8002AR are specified for the industrial temperature range of −40°C to +85°C. However, their thermal characteristics and power dissipation differ due to the higher quiescent current of the AD8009ARZ, which may require additional thermal consideration in high-density designs.