AD8422BRMZ
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 2679 PCS
- Package
- MSOP-8
- Series
- Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps
This in-depth comparison of the AD8422BRMZ and AD8422ARMZ provides valuable insights into their specifications and key features. We cover important factors in detail, including RoHS compliance, REACH status, series, mounting style, package type, and other relevant characteristics. Presenting the differences side by side simplifies component selection, making it easier for you to select the best option for your specific application.
Replacement verdict
The AD8422ARMZ and AD8422BRMZ are functionally interchangeable instrumentation amplifiers sharing identical pinout, package, supply range, and gain configuration; they differ only in factory-trimmed DC precision grades, with the B grade offering tighter offset voltage, offset drift, and gain error. The ARMZ is a valid drop-in substitute for the BRMZ in most applications, provided the reduced DC accuracy specifications remain acceptable for the target circuit.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8422ARMZ | AD8422BRMZ | Why it matters |
|---|---|---|---|
| Grade / Accuracy Class | A grade | B grade | The B grade offers tighter guaranteed specifications (e.g., offset voltage, gain error, CMRR), which directly affects measurement precision in instrumentation applications. |
| Input Offset Voltage (max) | ±70 µV | ±35 µV | Lower offset voltage reduces DC error at the output, critical for precision signal conditioning of small sensor signals. |
| Input Offset Voltage Drift (max) | ±1.0 µV/°C | ±0.5 µV/°C | Lower drift maintains accuracy over temperature, important for stable performance in industrial and automotive environments. |
| Gain Error (max) | 0.03% | 0.02% | Tighter gain error improves absolute accuracy of the amplified signal, affecting overall system calibration requirements. |
| CMRR (min, G=1000) | 114 dB | 120 dB | Higher common-mode rejection suppresses interference and noise, essential when amplifying small differential signals in noisy environments. |
| Input Noise (1 kHz, max) | 8 nV/√Hz | 8 nV/√Hz | Low voltage noise determines the minimum resolvable signal; both grades share the same noise performance, so noise is not a differentiator. |
| Supply Voltage Range | ±2.3 V to ±18 V (4.6 V to 36 V) | ±2.3 V to ±18 V (4.6 V to 36 V) | Wide supply range enables use in both battery-powered and industrial systems; identical for both grades. |
| Gain Range | 1 to 1000 (set by single resistor) | 1 to 1000 (set by single resistor) | Flexible gain setting via one external resistor supports many sensor front-ends; identical for both grades. |
| Package | 8-lead MSOP (RM) | 8-lead MSOP (RM) | Same footprint and pinout allow drop-in replacement without PCB changes. |
| Operating Temperature Range | −40 °C to +85 °C | −40 °C to +85 °C | Identical temperature range ensures both parts suit the same environmental conditions. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8422BRMZ | AD8422ARMZ |
|---|---|---|
| Part Status | Active | Active |
| Amplifier Type | Instrumentation | Instrumentation |
| Number of Circuits | 1 | 1 |
| Output Type | Rail-to-Rail | Rail-to-Rail |
| Slew Rate | 0.8V/µs | 0.8V/µs |
| -3 dB Bandwidth | 2.2 MHz | 2.2 MHz |
| Current - Input Bias | 200 pA | 500 pA |
| Voltage - Input Offset | 50 µV | 70 µV |
| Supply Current | 300µA | 300µA |
| Current - Output / Channel | 20 mA | 20 mA |
| Voltage - Supply Span(Min) | 4.6 V | 4.6 V |
| Voltage - Supply Span(Max) | 36 V | 36 V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
The AD8422ARMZ and AD8422BRMZ are both AD8422 instrumentation amplifiers in an 8-lead MSOP (RM) package, but they differ in grade. The AD8422ARMZ is the A-grade version and the AD8422BRMZ is the B-grade version, which is specified with tighter performance tolerances, including lower gain error and offset voltage specifications per the Analog Devices datasheet.
Yes. Both devices are offered in the same 8-lead MSOP package (RM suffix) with identical pinout, so they are pin-to-pin and footprint compatible. The difference is the performance grade, not the package or pin assignment.
Because both parts share the same package and pinout, the AD8422BRMZ can be used in place of the AD8422ARMZ where the tighter B-grade specifications are acceptable or beneficial. The design should still be validated against the AD8422 datasheet, since the B-grade has different specified limits than the A-grade.
The AD8422BRMZ (B-grade) is the higher-precision grade and is specified with tighter tolerances than the AD8422ARMZ (A-grade). For applications requiring tighter gain error and offset performance, the B-grade is the appropriate choice per the Analog Devices AD8422 datasheet.
Both grades are part of the same AD8422 family and share the same operating supply range and temperature range as specified in the Analog Devices AD8422 datasheet. The grade designation affects specified performance limits, not the fundamental supply or temperature ratings.
Yes. Both are AD8422 instrumentation amplifiers with the same core architecture and functionality. The distinction is the grade: the AD8422BRMZ is specified to tighter performance limits than the AD8422ARMZ, as documented in the Analog Devices AD8422 datasheet.