AD8544AR vs AD8542ARZ

This in-depth comparison of the AD8544AR and AD8542ARZ provides valuable insights into their specifications and key features. We cover important factors in detail, including RoHS compliance, REACH status, series, mounting style, package type, and other relevant characteristics. Presenting the differences side by side simplifies component selection, making it easier for you to select the best option for your specific application.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AD8542ARZ and AD8544AR are both CMOS rail-to-rail input/output operational amplifiers from the same AD854x family, sharing identical supply voltage range, bandwidth, and package type, but they differ in channel count (dual versus quad), making the AD8544AR a functional candidate only where the additional two channels and the associated pinout change are acceptable in the target design.

Amplifier Type High match
Supply Voltage Range High match
Package Type High match
Channel Count Not compatible

Parts at a glance

Part A

AD8544AR

Analog Devices Inc.

Lifecycle
Active
Stock
1986 PCS
Package
SOIC-14
Series
Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps
Part B

AD8542ARZ

Analog Devices Inc.

Lifecycle
Active
Stock
4689 PCS
Package
SOIC-8
Series
Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8542ARZ AD8544AR Why it matters
Number of Amplifiers 2 4 Determines how many independent op-amp channels are available in a single package, directly affecting circuit density and channel count.
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V Defines the operating supply window; matching ranges ensure the parts are interchangeable in the same power rail design.
Input Offset Voltage (max) 6 mV 6 mV Sets the worst-case DC error at the input; identical values mean comparable precision in signal conditioning.
Gain Bandwidth Product 1 MHz 1 MHz Determines the frequency range over which the amplifier provides useful gain; matching values preserve AC performance.
Input Bias Current (typ) 1 pA 1 pA Very low CMOS input bias current minimizes errors in high-impedance sensor and filter circuits; equal values ensure equivalent behavior.
Slew Rate 0.92 V/µs 0.92 V/µs Governs large-signal transient response; identical slew rates mean comparable dynamic performance.
Quiescent Current per Amplifier (typ) 45 µA 45 µA Affects total power consumption; per-amplifier matching allows predictable power budgeting when channel count changes.
Package 8-Lead SOIC 14-Lead SOIC Footprint and pin count differ, so PCB layout and assembly must be redesigned when substituting one for the other.
Operating Temperature Range -40 °C to +125 °C -40 °C to +125 °C Confirms both parts are rated for the same environmental conditions, supporting use in industrial and automotive applications.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8544AR AD8542ARZ
Part Status Obsolete Active
Amplifier Type General Purpose General Purpose
Number of Circuits 4 2
Output Type Rail-to-Rail Rail-to-Rail
Slew Rate 0.92V/µs 0.92V/µs
Gain Bandwidth Product 1 MHz 1 MHz
Current - Input Bias 4 pA 4 pA
Voltage - Input Offset 1 mV 1 mV
Supply Current 45µA (x4 Channels) 45µA (x2 Channels)
Current - Output / Channel 30 mA 30 mA
Voltage - Supply Span(Min) 2.7 V 2.7 V
Voltage - Supply Span(Max) 5.5 V 5.5 V
Operating Temperature -40°C ~ 125°C -40°C ~ 125°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the key differences between the AD8542ARZ and the AD8544AR?

The AD8542ARZ is a dual (2-channel) rail-to-rail CMOS operational amplifier in an 8-lead SOIC package, while the AD8544AR is a quad (4-channel) rail-to-rail CMOS op amp in a 14-lead SOIC package. Both share the same core amplifier design and similar per-channel specifications, but differ in channel count and package pin count.

Are the AD8542ARZ and AD8544AR pin-compatible?

No. The AD8542ARZ uses an 8-lead SOIC (R-8) package, and the AD8544AR uses a 14-lead SOIC (R-14) package. They have different pin counts and pinouts, so they are not drop-in replacements for each other on the same PCB footprint.

Do the AD8542ARZ and AD8544AR have the same supply voltage range?

Yes. Both devices are specified for single-supply operation from 2.7 V to 5.5 V, and they also support dual-supply operation within that total range. This makes them suitable for low-voltage battery-powered and portable systems.

What is the gain bandwidth product of the AD8542ARZ and AD8544AR?

Both the AD8542ARZ and AD8544AR have a gain bandwidth product of 1 MHz, allowing them to handle general-purpose signal conditioning, filtering, and buffering tasks in low-power applications.

How do the quiescent supply currents compare between the AD8542ARZ and AD8544AR?

The AD8542ARZ (dual) typically draws about 45 µA per amplifier, while the AD8544AR (quad) also specifies approximately 45 µA per amplifier. Total quiescent current therefore scales with the number of channels: roughly 90 µA for the dual and roughly 180 µA for the quad, making both well suited to low-power designs.

Are the AD8542ARZ and AD8544AR rail-to-rail on both input and output?

Yes. Both devices feature rail-to-rail input and output (RRIO) capability, allowing input signals to swing to both supply rails and output voltage to swing close to both rails, which maximizes dynamic range in low-voltage systems.

What are the input offset voltage and input bias current specifications for these op amps?

Both the AD8542ARZ and AD8544AR specify a typical input offset voltage of 1 mV (with a maximum around 6 mV) and very low input bias current in the picoampere range, thanks to their CMOS input stage. These characteristics suit high-impedance sensor interfaces and precision low-power signal chains.

Which applications are better suited to the AD8542ARZ versus the AD8544AR?

The AD8542ARZ (dual) is typically chosen for compact designs needing two amplifier channels, such as single-sensor signal conditioning or two-stage filters. The AD8544AR (quad) is preferred when four channels are required in one package, such as multi-sensor interfaces, active filter banks, or multi-channel buffering, reducing board space and component count versus using two dual devices.