AD9220ARSZ
Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 2918 PCS
- Package
- SSOP-28
- Series
- Data Acquisition - Analog to Digital Converters (ADC)
This in-depth comparison of the AD9220ARSZ and AD9223ARS provides valuable insights into their specifications and key features. We cover important factors in detail, including RoHS compliance, REACH status, series, mounting style, package type, and other relevant characteristics. Presenting the differences side by side simplifies component selection, making it easier for you to select the best option for your specific application.
Replacement verdict
The AD9223ARS is a viable functional replacement candidate for the AD9220ARSZ in many 12-bit ADC applications, sharing the same resolution, analog input architecture, and package footprint. However, designers must validate the lower maximum sampling rate and the reduced analog input bandwidth against their specific signal chain requirements before committing to a drop-in substitution.
Analog Devices Inc.
Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD9220ARSZ | AD9223ARS | Why it matters |
|---|---|---|---|
| Resolution | 12 bits | 12 bits | Both converters provide 12-bit resolution, so quantization accuracy is equivalent for signal-chain design. |
| Sampling Rate | 10 MSPS | 3 MSPS | The maximum conversion rate determines the input bandwidth and Nyquist limit; the AD9220 supports much higher-speed signals than the AD9223. |
| Input Type | Differential (single-ended capable) | Differential (single-ended capable) | Differential inputs improve noise immunity and allow flexible front-end configurations for both parts. |
| Supply Voltage | 5 V (single supply) | 5 V (single supply) | Both operate from a single 5 V rail, simplifying power-supply design and allowing drop-in compatibility. |
| Power Consumption | ~310 mW typical | ~100 mW typical | Lower power dissipation in the AD9223 benefits thermally constrained or battery-powered systems. |
| SNR | ~70 dB | ~70 dB | Similar signal-to-noise ratio means comparable dynamic range for both converters in the same application. |
| Package | 28-lead SSOP | 28-lead SSOP | Identical package and pinout enable direct board-level substitution without layout changes. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Matching industrial temperature ranges ensure both parts suit the same environmental conditions. |
| Output Interface | Parallel CMOS | Parallel CMOS | A common parallel CMOS output interface allows either part to connect to the same digital backend logic. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD9220ARSZ | AD9223ARS |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Number of Bits | 12 | 12 |
| Sampling Rate(Per Second) | 10M | 3M |
| Data Interface | Parallel | Parallel |
| Number of A/D Converters | 1 | 7 |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Number of Inputs | 1 | - |
| Input Type | Differential, Single Ended | - |
| Configuration | S/H-ADC | - |
| Ratio - S / H: ADC | 1:1 | - |
| Architecture | Pipelined | - |
| Reference Type | External, Internal | - |
| Voltage - Supply, Analog | 5V | - |
| Voltage - Supply, Digital | 2.7V ~ 5.25V | - |
The AD9220ARSZ is a 12-bit, 10 MSPS analog-to-digital converter, while the AD9223ARS is a 12-bit, 3 MSPS ADC. Both are monolithic sampling ADCs from Analog Devices in a 28-lead SSOP package, but they differ in maximum sampling rate, power consumption, and dynamic performance specifications.
Yes. Both devices are offered in the same 28-lead SSOP (RS) package and share the same pinout, which allows the AD9223ARS to be used as a lower-speed drop-in alternative to the AD9220ARSZ in existing layouts, provided the system timing and performance requirements are revalidated.
The AD9220ARSZ supports a maximum sampling rate of 10 MSPS, whereas the AD9223ARS supports a maximum sampling rate of 3 MSPS. Designs requiring sample rates above 3 MSPS must use the AD9220ARSZ.
The AD9220ARSZ typically dissipates about 250 mW at 10 MSPS, while the AD9223ARS typically dissipates about 100 mW at 3 MSPS. The lower power of the AD9223ARS makes it preferable for power-sensitive designs that do not need the higher throughput.
Yes. Both the AD9220ARSZ and AD9223ARS use a pipelined switched-capacitor architecture with a differential analog input and an on-chip reference, and both provide a 12-bit parallel CMOS-compatible output. The internal reference can be overdriven by an external reference on both parts.
Substitution is possible only if the system's maximum sample rate is 3 MSPS or lower and the dynamic performance (SNR, SFDR) of the AD9223ARS meets the application requirements. Because the AD9223ARS has lower throughput and different AC specifications, the design must be revalidated against the AD9223ARS datasheet before replacement.
The AD9220ARSZ is suited to higher-speed signal chains such as medical imaging, CCD/camera digitization, and communications receivers requiring up to 10 MSPS. The AD9223ARS targets lower-power, lower-speed applications such as portable instrumentation, data acquisition, and battery-powered systems operating at up to 3 MSPS.