ADM3485EAR vs ADM3483EARZ

This in-depth comparison of the ADM3485EAR and ADM3483EARZ provides valuable insights into their specifications and key features. We cover important factors in detail, including RoHS compliance, REACH status, series, mounting style, package type, and other relevant characteristics. Presenting the differences side by side simplifies component selection, making it easier for you to select the best option for your specific application.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADM3483EARZ and ADM3485EAR are both 3.3 V half-duplex RS-485/RS-422 transceivers in the same 8-lead SOIC package with identical pinout, making them strong functional replacement candidates. The ADM3485EAR offers a higher maximum data rate (12 Mbps versus 250 kbps) and a wider receiver input common-mode range, while the ADM3483EARZ provides a lower slew-rate-limited option for reduced EMI. Designers should confirm data-rate requirements and bus loading before substituting.

Package Type High match
Pinout Configuration High match
Data Rate Validation required
Receiver Common-Mode Range Validation required

Parts at a glance

Part A

ADM3485EAR

Analog Devices Inc.

Lifecycle
Active
Stock
3150 PCS
Package
SOIC-8
Series
Interface - Drivers, Receivers, Transceivers
Part B

ADM3483EARZ

Analog Devices Inc.

Lifecycle
Active
Stock
5926 PCS
Package
SOIC-8
Series
Interface - Drivers, Receivers, Transceivers

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADM3483EARZ ADM3485EAR Why it matters
Data Rate 250 kbps 10 Mbps Determines the maximum communication speed the transceiver can support; a 40x difference affects whether the part suits low-speed or high-speed bus designs.
Number of Drivers/Receivers 1/1 1/1 Defines the half-duplex configuration; both are single-driver/single-receiver, so bus topology compatibility is equivalent.
Duplex Mode Half-duplex Half-duplex Half-duplex operation uses a single twisted pair; both parts match, so wiring and protocol requirements are the same.
Supply Voltage 3.0 V to 3.6 V 3.0 V to 3.6 V Both operate from a 3.3 V nominal rail, allowing direct substitution in 3.3 V systems without supply redesign.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Identical industrial temperature range means both are suitable for the same environmental conditions.
Package / Mounting 8-SOIC (Surface Mount) 8-SOIC (Surface Mount) Same package and footprint allow drop-in PCB replacement without layout changes.
ESD Protection (Bus Pins) ±15 kV (HBM) ±15 kV (HBM) Equivalent ESD robustness on the RS-485 bus pins ensures comparable field reliability.
Receiver Input Impedance (Unit Load) 1 unit load (12 kΩ) 1 unit load (12 kΩ) Both present one unit load, so the same number of nodes (up to 32) can share the bus.
Fail-Safe Receiver Yes (open/short fail-safe) Yes (open/short fail-safe) Fail-safe receivers guarantee a defined logic state on floating or terminated bus lines, preventing spurious data; both provide this.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADM3485EAR ADM3483EARZ
Part Status Obsolete Active
Type Transceiver Transceiver
Protocol RS422, RS485 RS422, RS485
Number of Drivers/Receivers 1/1 1/1
Duplex Half Half
Receiver Hysteresis 50 mV 50 mV
Data Rate 10Mbps 250kbps
Voltage - Supply 3V ~ 3.6V 3V ~ 3.6V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the primary differences between the ADM3483EARZ and ADM3485EAR?

The ADM3483EARZ and ADM3485EAR are both 3.3 V, half-duplex RS-485/RS-422 transceivers from Analog Devices in an 8-lead SOIC package. The key difference is the data rate: the ADM3483E is specified for 250 kbps, while the ADM3485E is specified for 12 Mbps. Both share the same pinout and supply range, but the ADM3485E supports much higher signaling rates for faster bus applications.

Are the ADM3483EARZ and ADM3485EAR pin-compatible?

Yes. Both devices are offered in the same 8-lead SOIC (R-8) package with an identical pinout: RO, RE, DE, DI, GND, A, B, and VCC. This allows a board designed for one part to accept the other without layout changes, provided the data-rate and bus-loading requirements are satisfied.

What supply voltage do the ADM3483EARZ and ADM3485EAR require?

Both transceivers operate from a single 3.3 V supply. The specified supply voltage range is 3.0 V to 3.6 V, making them suitable for 3.3 V logic systems and mixed-supply designs that require RS-485/RS-422 interfacing.

How do the data rates of the ADM3483EARZ and ADM3485EAR compare?

The ADM3483EARZ is rated for a maximum data rate of 250 kbps, while the ADM3485EAR is rated for 12 Mbps. The higher rate of the ADM3485E supports faster bus communication but may require more careful attention to bus termination, stub length, and signal integrity.

Do both parts support half-duplex RS-485 and RS-422 operation?

Yes. Both the ADM3483EARZ and ADM3485EAR are half-duplex transceivers compliant with RS-485 and RS-422 signaling. They feature a differential driver and receiver with enable controls (DE and RE) for bus sharing in multi-point and point-to-point networks.

What is the receiver input impedance and bus loading of these transceivers?

Both the ADM3483EARZ and ADM3485EAR provide a 1/8-unit load receiver input impedance, allowing up to 256 transceivers to be connected to a single RS-485 bus. This high input impedance supports large multi-drop networks without exceeding the standard unit-load limit.

Do the ADM3483EARZ and ADM3485EAR include ESD protection?

Yes. Both devices are members of the ADM3483E/ADM3485E family, which includes enhanced ESD protection on the RS-485 bus pins (A and B). The bus pins are protected against electrostatic discharge events, supporting robust operation in industrial environments. Designers should consult the official Analog Devices datasheet for the exact ESD test levels and conditions.

Can the ADM3483EARZ be replaced by the ADM3485EAR in an existing design?

Because the two parts are pin-compatible and share the same 3.3 V supply and half-duplex RS-485/RS-422 interface, the ADM3485EAR can generally be used in place of the ADM3483EARZ when the higher 12 Mbps data rate is acceptable or desired. However, the replacement should be validated against the bus topology, termination, cable length, and EMI requirements, since the faster edge rates of the ADM3485E may affect signal integrity.