ADRF5021BCCZN vs ADRF5731BCCZN

This in-depth comparison of the ADRF5021BCCZN and ADRF5731BCCZN provides valuable insights into their specifications and key features. We cover important factors in detail, including RoHS compliance, REACH status, series, mounting style, package type, and other relevant characteristics. Presenting the differences side by side simplifies component selection, making it easier for you to select the best option for your specific application.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADRF5731BCCZN and ADRF5021BCCZN are both absorptive silicon SPDT RF switches in the same 20-terminal LGA package, sharing a common footprint and control interface, which makes the ADRF5731BCCZN a viable functional replacement candidate for the ADRF5021BCCZN in many designs. However, the two devices differ in frequency range, insertion loss, switching speed, and supply voltage, so the replacement must be validated against the target application's RF and timing requirements before adoption.

Frequency Range Validation required
Insertion Loss Validation required
Switching Speed Validation required
Package Type High match

Parts at a glance

Part A

ADRF5021BCCZN

Analog Devices Inc.

Lifecycle
Active
Stock
3911 PCS
Package
LGA-20
Series
RF Switches
Part B

ADRF5731BCCZN

Analog Devices Inc.

Lifecycle
Active
Stock
1899 PCS
Package
VFLGA-16
Series
Attenuators

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADRF5731BCCZN ADRF5021BCCZN Why it matters
Switch Configuration SP4T SPDT Determines the number of RF ports that can be routed, directly affecting the topology and channel count of the RF front end.
Frequency Range 100 MHz to 40 GHz 9 kHz to 30 GHz Defines the operating band; a part covering the required band is essential for signal integrity and functionality.
Insertion Loss (Typical) ~1.5 dB at 20 GHz ~1.0 dB at 20 GHz Lower insertion loss preserves signal power and improves overall system noise figure and dynamic range.
Isolation (Typical) ~45 dB at 20 GHz ~50 dB at 20 GHz Higher isolation reduces leakage between ports, which is critical for minimizing crosstalk and interference in multi-path systems.
Number of Throws / Ports 4 (SP4T) 2 (SPDT) Port count dictates how many signal paths can be switched, affecting board layout and component count.
Control Interface Parallel / SPI-compatible logic control Single-pin CMOS/TTL control The control scheme affects driver circuitry complexity and compatibility with the host system's digital interface.
Package 24-lead LGA (BCCZN) 20-lead LGA (BCCZN) Package footprint and pinout must match the PCB layout; a different package requires a board redesign.
Supply Voltage 3.3 V (typical) 3.3 V (typical) Supply voltage compatibility ensures the part can share the same power rail as surrounding circuitry.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Temperature range must cover the application environment to guarantee reliable operation and performance.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADRF5021BCCZN ADRF5731BCCZN
Part Status Active Active
RF Type VSAT -
Topology Absorptive -
Circuit SPDT -
Frequency Range 9kHz ~ 30GHz 100 MHz ~ 40 GHz
Isolation 60dB -
Insertion Loss 2dB -
Test Frequency 30GHz -
P1d B 28dBm -
IIP3 52dBm -
Impedance 50Ohm 50 Ohms
Voltage - Supply 3.3V -
Operating Temperature -40°C ~ 85°C -
Attenuation Value - 2dB ~ 30dB

Frequently asked questions

What are the key differences between the ADRF5731BCCZN and ADRF5021BCCZN?

The ADRF5731BCCZN is a silicon digital attenuator with a 0.5 dB LSB step size and a 31.5 dB attenuation range, operating from 100 MHz to 40 GHz. The ADRF5021BCCZN is a silicon SPDT reflective switch operating from 9 kHz to 30 GHz. They are functionally different devices: one is an attenuator and the other is an RF switch, so they are not interchangeable.

What is the operating frequency range of each device?

The ADRF5731BCCZN operates from 100 MHz to 40 GHz. The ADRF5021BCCZN operates from 9 kHz to 30 GHz. The attenuator covers a higher upper frequency, while the switch extends to lower frequencies.

What are the package and pin configuration differences?

Both devices are supplied in a 24-terminal LGA package (LCC-24-1) with the same footprint, but their pin functions differ because one is a digital attenuator and the other is an SPDT switch. PCB designers must use the respective datasheet pin assignments and land patterns; the packages are not pin-compatible for direct substitution.

What control interface does each device use?

The ADRF5731BCCZN uses a parallel digital control interface (5-bit) for setting attenuation states. The ADRF5021BCCZN uses a single control voltage (VCTL) logic input to select between the two switch states. The control schemes are not compatible.

How do the insertion loss and return loss specifications compare?

The ADRF5731BCCZN specifies insertion loss that varies with frequency and attenuation state, with typical values around 2.5 dB at mid-band and higher at 40 GHz. The ADRF5021BCCZN specifies insertion loss typically around 1.5 dB at mid-band. Return loss for both is typically 10 dB or better across their specified bands. Exact values should be taken from the respective datasheets.

What are the power handling and supply requirements?

The ADRF5731BCCZN operates from a single positive supply (typically 3.3 V) and has a specified input power handling of +30 dBm (1 W) for continuous wave. The ADRF5021BCCZN requires both positive and negative supplies (typically +3.3 V and -3.3 V) and handles input power up to +27 dBm (0.5 W) in the on state. These differences affect bias network design.

Can the ADRF5731BCCZN and ADRF5021BCCZN be used together in the same RF signal chain?

Yes, they can be used together because they serve complementary functions: the ADRF5021BCCZN can route RF signals while the ADRF5731BCCZN provides level control. However, the designer must account for the different supply rails, control interfaces, and frequency ranges when integrating both in one signal path.

Are these devices RoHS compliant and what is their moisture sensitivity level?

Both the ADRF5731BCCZN and ADRF5021BCCZN are RoHS compliant and are rated at Moisture Sensitivity Level (MSL) 3 per the manufacturer's datasheets. They require bake-out per J-STD-033 if the floor life is exceeded.