ADS1210U
Texas Instruments
- Lifecycle
- Active
- Stock
- 5384 PCS
- Package
- SOIC-8
- Series
- Data Acquisition - Analog to Digital Converters (ADC)
This in-depth comparison of the ADS1210U and ADS1286UCG4 provides valuable insights into their specifications and key features. We cover important factors in detail, including RoHS compliance, REACH status, series, mounting style, package type, and other relevant characteristics. Presenting the differences side by side simplifies component selection, making it easier for you to select the best option for your specific application.
Replacement verdict
The ADS1210U and ADS1286UCG4 are not functionally interchangeable; they differ in resolution, architecture, interface, and package, so the ADS1286UCG4 cannot serve as a direct substitute for the ADS1210U in existing designs.
Texas Instruments
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1210U | ADS1286UCG4 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 12 | Resolution determines the smallest signal change the ADC can distinguish; a 24-bit ADC offers far finer measurement granularity than a 12-bit device. |
| Architecture | Delta-Sigma | SAR | Delta-sigma converters excel at high-resolution low-frequency signals, while SAR converters offer faster sampling and lower latency, affecting application suitability. |
| Sampling Rate (max) | 10 kSPS | 20 kSPS | Maximum sampling rate defines the bandwidth of signals the ADC can digitize; the SAR part supports roughly twice the throughput. |
| Number of Input Channels | 1 (differential) | 1 (differential) | Both are single-channel differential devices, so channel count is not a differentiator, but input configuration affects wiring and signal conditioning. |
| Interface | SPI (serial) | SPI (serial) | Both use a serial SPI-compatible interface, simplifying digital connection to microcontrollers and FPGAs. |
| Supply Voltage | 5 V (analog and digital) | 5 V | Supply voltage compatibility ensures the part can drop into the same power rail without additional regulation. |
| Package | 18-pin SOIC (DIP-18 option) | 8-pin SOIC | Package footprint and pin count affect PCB layout and whether a direct board-level substitution is possible. |
| Operating Temperature Range | -40°C to +85°C | -40°C to +85°C | Matching industrial temperature ranges confirm both parts suit the same environmental conditions. |
| Internal Reference | No (external reference required) | No (external reference required) | Both require an external voltage reference, so reference design and accuracy considerations remain similar. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1210U | ADS1286UCG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Last Time Buy | Discontinued at Digi-Key |
| Number of Bits | 24 | 12 |
| Sampling Rate(Per Second) | 16k | 20k |
| Number of Inputs | 1 | 1 |
| Input Type | Differential | Differential |
| Data Interface | SPI | SPI |
| Configuration | PGA-ADC | S/H-ADC |
| Ratio - S / H: ADC | - | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | Sigma-Delta | SAR |
| Reference Type | External, Internal | External |
| Voltage - Supply, Analog | 5V | 5V |
| Voltage - Supply, Digital | 5V | 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Features | PGA | - |
The ADS1210U is a 24-bit, 10-channel delta-sigma analog-to-digital converter with a programmable gain amplifier, SPI-compatible serial interface, and a maximum data rate of 15.6 kSPS, housed in a 24-pin SOIC package. The ADS1286UCG4 is a 12-bit, single-channel successive-approximation register (SAR) ADC with a serial interface and a maximum sampling rate of 200 kSPS, supplied in a 10-pin VSSOP package. They differ fundamentally in resolution, architecture, channel count, package, and throughput.
No. The ADS1210U uses a 24-pin SOIC (DW) package, while the ADS1286UCG4 uses a 10-pin VSSOP (DGS) package. The pin counts, pin functions, and PCB land patterns are different, so they are not drop-in replacements for one another.
The ADS1210U is a 24-bit delta-sigma converter, offering high resolution suitable for low-frequency, high-precision measurements. The ADS1286UCG4 is a 12-bit SAR converter, offering lower resolution but faster conversion suitable for higher-speed, lower-precision sampling applications.
The ADS1210U supports a maximum data rate of 15.6 kSPS. The ADS1286UCG4 supports a maximum sampling rate of 200 kSPS. The ADS1286UCG4 therefore provides a significantly higher throughput, while the ADS1210U trades speed for much higher resolution.
The ADS1210U provides a 10-channel input multiplexer, allowing multiple signal sources to be selected. The ADS1286UCG4 is a single-channel device with one analog input, so it cannot multiplex between multiple inputs without external circuitry.
Both devices operate from a single 5 V analog supply and use a serial digital interface for communication with a host controller. The ADS1210U uses an SPI-compatible serial interface, while the ADS1286UCG4 uses a serial interface compatible with SPI, QSPI, and MICROWIRE. Designers should confirm exact timing and logic-level requirements against the respective manufacturer datasheets.
The ADS1210U, with its 24-bit resolution, programmable gain amplifier, and multi-channel input, is suited to precision measurement applications such as industrial process control, weigh scales, and sensor signal conditioning. The ADS1286UCG4, with its 12-bit resolution and 200 kSPS throughput in a small 10-pin package, is suited to space-constrained, higher-speed applications such as portable instrumentation and general-purpose data acquisition where 12-bit precision is sufficient.
No. Because the two devices differ in resolution (12-bit vs 24-bit), architecture (SAR vs delta-sigma), channel count (1 vs 10), package (10-pin VSSOP vs 24-pin SOIC), and maximum data rate (200 kSPS vs 15.6 kSPS), a direct substitution is not possible. Any replacement would require a redesign of the PCB layout, signal chain, and firmware, followed by validation against the target system requirements.