ADS1259IPWR vs ADS1230IPW

This in-depth comparison of the ADS1259IPWR and ADS1230IPW provides valuable insights into their specifications and key features. We cover important factors in detail, including RoHS compliance, REACH status, series, mounting style, package type, and other relevant characteristics. Presenting the differences side by side simplifies component selection, making it easier for you to select the best option for your specific application.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS1230IPW and ADS1259IPWR are not drop-in replacements for one another. Although both are 24-bit delta-sigma ADCs in TSSOP packages, they differ fundamentally in resolution architecture, interface type, input configuration, and supply requirements, so the ADS1259IPWR cannot be substituted directly for the ADS1230IPW without a full design review.

Different interface type Different input configuration Different supply architecture Different conversion architecture

Parts at a glance

Part A

ADS1259IPWR

Texas Instruments

Lifecycle
Active
Stock
6414 PCS
Package
TSSOP-20
Series
Data Acquisition - Analog to Digital Converters (ADC)
Part B

ADS1230IPW

Texas Instruments

Lifecycle
Active
Stock
2859 PCS
Package
TSSOP-16
Series
Data Acquisition - Analog to Digital Converters (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1230IPW ADS1259IPWR Why it matters
Resolution (bits) 20 24 Higher resolution enables finer measurement of small signal changes, which is critical for precision sensing applications.
Number of input channels 1 (differential) 1 (differential) Both are single-channel differential devices, so channel count is not a differentiator for substitutability.
Data rate (max SPS) 80 14400 A much higher maximum sample rate allows faster signal acquisition and wider bandwidth for dynamic measurements.
Interface SPI (2-wire, read-only) SPI (bidirectional) Interface compatibility affects how easily the part can be dropped into an existing digital bus and firmware design.
Supply voltage (analog) 2.7 V to 5.3 V 4.75 V to 5.25 V The wider analog supply range of the ADS1230 allows operation from lower-voltage rails, affecting system power design.
PGA / gain stages Fixed gain 128 Programmable (1 to 128) A programmable gain amplifier provides flexibility to match different sensor signal amplitudes without external conditioning.
Package 16-TSSOP 20-TSSOP Different package footprints and pin counts require PCB layout changes, impacting direct board-level substitution.
Operating temperature range -40 °C to +85 °C -40 °C to +105 °C A wider temperature range supports use in harsher environments and industrial applications.
Internal oscillator Yes (on-chip) Yes (on-chip) An integrated oscillator simplifies design by removing the need for an external clock source.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1259IPWR ADS1230IPW
Part Status Active Active
Number of Bits 24 20
Sampling Rate(Per Second) 14k 80
Number of Inputs 1 1
Input Type Differential, Single Ended Differential, Single Ended
Data Interface SPI SPI
Configuration ADC PGA-ADC
Number of A/D Converters 1 1
Architecture Sigma-Delta Sigma-Delta
Reference Type External External
Voltage - Supply, Analog 5V 2.7V ~ 5.3V
Voltage - Supply, Digital 2.7V ~ 5.25V 2.7V ~ 5.3V
Features PGA PGA
Operating Temperature -40°C ~ 105°C -40°C ~ 85°C

Frequently asked questions

What are the primary functional differences between the ADS1230IPW and ADS1259IPWR?

The ADS1230IPW is a 20-bit delta-sigma ADC designed for bridge sensor applications, featuring an on-chip PGA with gains of 1, 2, 64, and 128, and a maximum data rate of 80 SPS. The ADS1259IPWR is a 24-bit delta-sigma ADC with a programmable gain amplifier (gains 1 to 128), a maximum data rate of 14.4 kSPS, and integrated features such as a voltage reference and oscillator, targeting higher-resolution, higher-speed industrial measurement systems.

Are the ADS1230IPW and ADS1259IPWR pin-compatible?

No. The ADS1230IPW is offered in a 16-pin TSSOP package, while the ADS1259IPWR is offered in a 20-pin TSSOP package. The differing pin counts and pin functions mean they are not drop-in replacements and require separate PCB layouts.

How do the resolution and data rates of the two ADCs compare?

The ADS1230IPW provides 20-bit resolution with output data rates of 10 SPS or 80 SPS. The ADS1259IPWR provides 24-bit resolution with programmable data rates up to 14.4 kSPS. The ADS1259IPWR therefore offers higher resolution and significantly faster throughput, while the ADS1230IPW targets low-speed, high-accuracy bridge measurements.

Do both devices include an integrated programmable gain amplifier (PGA)?

Yes, both include an on-chip PGA. The ADS1230IPW supports selectable gains of 1, 2, 64, and 128. The ADS1259IPWR supports programmable gains from 1 to 128. The gain options and associated input ranges differ, so signal-chain design must be validated against each datasheet.

What are the supply voltage requirements for each device?

The ADS1230IPW operates from a single analog supply (AVDD) of 2.7 V to 5.3 V and a digital supply (DVDD) of 2.7 V to 5.3 V. The ADS1259IPWR operates from an analog supply of 4.75 V to 5.25 V and a digital supply of 2.7 V to 5.25 V. Designs must confirm supply rails meet these ranges before substitution.

Which device is better suited for high-speed industrial measurement?

The ADS1259IPWR is better suited for higher-speed industrial measurement because it supports data rates up to 14.4 kSPS with 24-bit resolution and integrates a voltage reference and oscillator. The ADS1230IPW is limited to 80 SPS and is intended primarily for low-frequency bridge sensor applications.

Do both ADCs provide an integrated voltage reference?

No. The ADS1259IPWR includes an integrated voltage reference, whereas the ADS1230IPW requires an external reference voltage for ratiometric bridge measurements. This difference affects external component count and system accuracy budgeting.

What communication interface do these ADCs use?

Both devices use a serial interface for data output. The ADS1230IPW provides a simple two-wire serial interface (SCLK and DOUT/DRDY). The ADS1259IPWR uses an SPI-compatible serial interface. System firmware and host interface timing must be revalidated when comparing or migrating between the two parts.