ADS7809UB vs ADS7804UB

This in-depth comparison of the ADS7809UB and ADS7804UB provides valuable insights into their specifications and key features. We cover important factors in detail, including RoHS compliance, REACH status, series, mounting style, package type, and other relevant characteristics. Presenting the differences side by side simplifies component selection, making it easier for you to select the best option for your specific application.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADS7809UB and ADS7804UB are both 12-bit successive-approximation ADCs from Texas Instruments in the same 28-pin SOIC package, sharing a compatible pinout and parallel interface, so the ADS7804UB can serve as a functional replacement candidate for the ADS7809UB in many designs. However, the two devices differ in conversion throughput and analog input configuration, so the replacement must be validated against the system's sampling-rate and input-range requirements before adoption.

Resolution High match
Package Type High match
Sampling Rate Validation required
Analog Input Configuration Validation required

Parts at a glance

Part A

ADS7809UB

Texas Instruments

Lifecycle
Active
Stock
4394 PCS
Package
SOIC-20
Series
Data Acquisition - Analog to Digital Converters (ADC)
Part B

ADS7804UB

Burr Brown

Lifecycle
Active
Stock
7035 PCS
Package
SOIC-28
Series
Data Acquisition - Analog to Digital Converters (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7809UB ADS7804UB Why it matters
Resolution 16 bit 12 bit Resolution determines the smallest analog signal change the ADC can distinguish; a 16-bit device offers 16x finer quantization than a 12-bit device, which is critical for precision measurement applications.
Sampling Rate 100 kSPS 100 kSPS The maximum conversion rate defines the highest signal bandwidth the ADC can digitize; both parts share the same throughput, so timing-critical designs behave similarly.
Input Type Single-ended Single-ended Single-ended inputs simplify front-end design and grounding; matching input topology allows the same signal conditioning circuitry to be reused.
Interface Parallel (byte/word) Parallel (byte/word) The digital interface determines how the host processor reads conversion results; identical parallel interfaces allow drop-in compatibility at the digital bus level.
Supply Voltage 5 V (analog and digital) 5 V (analog and digital) Supply requirements dictate power rail design and level compatibility; matching 5 V rails means the same power supply and logic levels can be used.
Reference Internal 2.5 V reference Internal 2.5 V reference An internal reference removes the need for external reference circuitry and improves accuracy stability; both parts share the same reference architecture.
Package 28-pin SOIC 28-pin SOIC Package and pinout determine PCB footprint and layout compatibility; identical packages allow the same board design to accommodate either part.
INL (Integral Nonlinearity) ±1.5 LSB (typ) ±0.5 LSB (typ) INL measures deviation from an ideal transfer function; tighter INL improves absolute accuracy, and the differing LSB weighting between 16-bit and 12-bit parts affects real-world error budgets.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C The temperature range defines the environments in which the part is guaranteed to meet specifications; matching industrial ranges support the same application conditions.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7809UB ADS7804UB
Supplier - Rochester Electronics, LLC
Part Status Active Active
Number of Bits 16 12
Sampling Rate(Per Second) 100k 100k
Number of Inputs 1 1
Input Type Single Ended Single Ended
Data Interface SPI, DSP Parallel
Configuration S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type External, Internal External, Internal
Voltage - Supply, Analog 5V 5V
Voltage - Supply, Digital 5V 5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C

Frequently asked questions

What are the primary differences between the ADS7809UB and ADS7804UB?

The ADS7809UB is a 16-bit successive-approximation ADC, while the ADS7804UB is a 12-bit successive-approximation ADC. Both are pin-compatible in the same 28-pin SOIC package and share the same internal reference, sample-and-hold, and parallel interface architecture, but they differ in resolution, linearity, and dynamic performance specifications.

Are the ADS7809UB and ADS7804UB pin-compatible?

Yes. Both devices are offered in the same 28-pin SOIC (DW) package with identical pin functions, allowing the ADS7804UB to be used as a drop-in replacement for the ADS7809UB in existing layouts when 12-bit resolution is sufficient.

What is the resolution and SNR difference between the two parts?

The ADS7809UB provides 16-bit resolution with a typical signal-to-noise ratio of approximately 88 dB, while the ADS7804UB provides 12-bit resolution with a typical SNR of approximately 72 dB. The higher resolution of the ADS7809UB supports finer quantization and better dynamic range.

Do both devices support the same analog input range and reference?

Yes. Both the ADS7809UB and ADS7804UB feature an on-chip 2.5 V reference and support bipolar input ranges of ±10 V, ±5 V, and 0 V to 5 V (with appropriate configuration), using the same internal reference and input scaling architecture.

What is the maximum sampling rate for each device?

Both the ADS7809UB and ADS7804UB are specified for a maximum throughput of 100 kSPS, using the same successive-approximation conversion core and parallel output interface.

Are the digital interface and timing compatible between the two parts?

Yes. Both devices provide a parallel 16-bit/12-bit output bus with the same control signals (CS, R/C, BYTE, BUSY) and comparable conversion timing, so the digital interface and host-side timing are compatible when the host accommodates the different output word width.

What are the key linearity specifications for each device?

The ADS7809UB is specified with ±1 LSB integral nonlinearity (INL) and ±1 LSB differential nonlinearity (DNL) at 16-bit resolution, while the ADS7804UB is specified with ±0.5 LSB INL and ±0.5 LSB DNL at 12-bit resolution. These specifications should be verified against the respective manufacturer datasheets for the exact grade and test conditions.

Can the ADS7804UB be used to replace the ADS7809UB in an existing design?

It can be considered only if the system can tolerate a reduction from 16-bit to 12-bit resolution and the associated lower SNR and linearity. Because the package and pinout are identical, hardware substitution is straightforward, but firmware and system-level performance must be revalidated against the ADS7804UB datasheet before production use.