ADS8345E/2K5
Texas Instruments
- Lifecycle
- Active
- Stock
- 3595 PCS
- Package
- SSOP-20
- Series
- Data Acquisition - Analog to Digital Converters (ADC)
This in-depth comparison of the ADS8345E/2K5 and ADS8343EBG4 provides valuable insights into their specifications and key features. We cover important factors in detail, including RoHS compliance, REACH status, series, mounting style, package type, and other relevant characteristics. Presenting the differences side by side simplifies component selection, making it easier for you to select the best option for your specific application.
Replacement verdict
The ADS8345E/2K5 and ADS8343EBG4 are both 16-bit SAR analog-to-digital converters sharing a compatible serial interface and similar supply architecture, making the ADS8343EBG4 a viable functional replacement candidate for the ADS8345E/2K5 in many designs. However, the two devices differ in channel configuration and package footprint, so schematic and layout validation is required before substitution.
Texas Instruments
Texas Instruments
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS8345E/2K5 | ADS8343EBG4 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 16 | 16 | Both are 16-bit ADCs, so resolution is equivalent and not a differentiator for substitutability. |
| Number of input channels | 8 (single-ended) / 4 (differential) | 4 (single-ended) / 2 (differential) | Channel count determines how many signals can be multiplexed into one ADC; the ADS8345 supports twice as many inputs. |
| Sampling rate (max) | 100 kSPS | 100 kSPS | Throughput must meet the system's signal bandwidth; both parts offer the same maximum conversion rate. |
| Supply voltage (analog & digital) | 2.7 V to 5.25 V | 2.7 V to 5.25 V | Supply range must match the system rail; identical ranges allow drop-in use across 3 V and 5 V designs. |
| Interface type | SPI / QSPI / Microwire (serial) | SPI / QSPI / Microwire (serial) | Serial interface compatibility ensures the same host controller firmware and wiring can be reused. |
| Input type | Single-ended and pseudo-differential | Single-ended and pseudo-differential | Input configuration affects how sensor signals are connected; matching types simplifies board redesign. |
| Package / pin count | SSOP-20 (DBQ) | SSOP-16 (DBQ) | Different package pin counts mean the PCB footprint and pinout differ, so a direct drop-in replacement is not possible. |
| Operating temperature range | -40 °C to +85 °C | -40 °C to +85 °C | Temperature range must cover the application environment; identical ratings mean equal environmental suitability. |
| Reference input | External reference | External reference | Both require an external voltage reference, so the same reference circuit can be shared in a redesign. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS8345E/2K5 | ADS8343EBG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Discontinued at Digi-Key |
| Number of Bits | 16 | 16 |
| Sampling Rate(Per Second) | 100k | 100k |
| Number of Inputs | 4, 8 | 2, 4 |
| Input Type | Differential, Single Ended | Differential, Single Ended |
| Data Interface | SPI | SPI |
| Configuration | S/H-ADC | S/H-ADC |
| Ratio - S / H: ADC | 1:1 | 1:1 |
| Number of A/D Converters | 1 | 1 |
| Architecture | SAR | SAR |
| Reference Type | External | External |
| Voltage - Supply, Analog | 2.7V ~ 3.6V, 5V | 2.7V ~ 3.6V, 5V |
| Voltage - Supply, Digital | 2.7V ~ 3.6V, 5V | 2.7V ~ 3.6V, 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
The ADS8345E/2K5 is a 16-bit, 8-channel successive-approximation ADC with a serial interface, supplied in a 20-pin SSOP package and provided on a 2,500-unit tape-and-reel. The ADS8343EBG4 is a 16-bit, 4-channel successive-approximation ADC with a serial interface, supplied in a 16-pin SSOP package in a tube/tray format. The primary differences are channel count (8 vs. 4) and package pin count (20 vs. 16).
No. The ADS8345E/2K5 uses a 20-pin SSOP package, while the ADS8343EBG4 uses a 16-pin SSOP package. The different pin counts and pin assignments prevent direct pin-to-pin substitution without PCB redesign.
Yes. Both are 16-bit successive-approximation register (SAR) analog-to-digital converters with a serial (SPI-compatible) interface, and both operate from a single +2.7 V to +5.25 V supply, providing comparable resolution and conversion architecture.
The ADS8345E/2K5 provides 8 single-ended input channels (or 4 differential pairs), while the ADS8343EBG4 provides 4 single-ended input channels (or 2 differential pairs). The channel count is the most significant functional difference between the two devices.
The /2K5 suffix indicates the device is supplied in tape-and-reel packaging with 2,500 units per reel, which is suited to automated high-volume SMT assembly. The ADS8343EBG4, by contrast, is supplied in tube/tray packaging.
No. Because the ADS8343EBG4 has fewer input channels (4 vs. 8) and a different package footprint (16-pin vs. 20-pin SSOP), it cannot serve as a drop-in replacement. Any substitution requires verifying channel requirements, pinout, and PCB layout against the respective manufacturer datasheets.
Yes. Both the ADS8345E/2K5 and ADS8343EBG4 operate from a single +2.7 V to +5.25 V supply and use a serial interface compatible with SPI, QSPI, and Microwire, allowing similar host-controller interfacing when the channel count and package constraints are accommodated.