AM26C31ID vs AM26C31IDE4

This in-depth comparison of the AM26C31ID and AM26C31IDE4 provides valuable insights into their specifications and key features. We cover important factors in detail, including RoHS compliance, REACH status, series, mounting style, package type, and other relevant characteristics. Presenting the differences side by side simplifies component selection, making it easier for you to select the best option for your specific application.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AM26C31ID and AM26C31IDE4 are functionally equivalent quad differential line drivers from the same manufacturer family, sharing identical electrical specifications, logic function, and package footprint. The AM26C31IDE4 differs only by its automotive-grade qualification and extended temperature rating, making it a valid functional replacement candidate where automotive qualification is not mandatory, while requiring validation of the target application's environmental and qualification requirements.

Function and Output Type High match
Package and Pinout High match
Electrical Specifications High match
Qualification and Temperature Grade Validation required

Parts at a glance

Part A

AM26C31ID

Texas Instruments

Lifecycle
Active
Stock
7351 PCS
Package
SOIC-16
Series
Interface - Drivers, Receivers, Transceivers
Part B

AM26C31IDE4

Texas Instruments

Lifecycle
Active
Stock
3690 PCS
Package
SOIC-16
Series
Interface - Drivers, Receivers, Transceivers

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AM26C31ID AM26C31IDE4 Why it matters
Function Quadruple differential line driver Quadruple differential line driver Both devices perform the same core function, so they are functionally interchangeable in a circuit.
Number of Drivers 4 4 The driver count determines how many differential lines each device can drive, affecting channel capacity.
Supply Voltage Range 4.5 V to 5.5 V 4.5 V to 5.5 V The supply range must match the system rail to ensure proper operation and compatibility.
Output Type Differential (3-state) Differential (3-state) Three-state differential outputs allow bus sharing and proper termination in multi-driver systems.
Data Rate Up to 10 Mbps Up to 10 Mbps The maximum data rate determines whether the device meets the signaling speed requirements of the interface.
Operating Temperature Range -40 °C to 85 °C -40 °C to 85 °C The temperature range must cover the application environment for reliable operation.
Package / Mounting SOIC-16, surface mount SOIC-16, surface mount Package and mounting style must match the PCB footprint for a drop-in replacement.
Packaging / Ordering Suffix Tube / standard industrial grade E4 suffix (Pb-free / RoHS-compliant green molding compound) The E4 suffix indicates Pb-free/RoHS compliance, which matters for regulatory and environmental requirements.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AM26C31ID AM26C31IDE4
Supplier - Rochester Electronics, LLC,Texas Instruments
Part Status Active Discontinued at Digi-Key
Type Driver Driver
Number of Drivers/Receivers 4/0 4/0
Voltage - Supply 4.5V ~ 5.5V 4.5V ~ 5.5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What is the difference between the AM26C31ID and the AM26C31IDE4?

The AM26C31ID and AM26C31IDE4 are functionally identical quad differential line drivers. The primary difference is the ordering and packaging suffix: the AM26C31ID is supplied in a standard SOIC-16 tube/reel configuration, while the AM26C31IDE4 suffix denotes a specific Texas Instruments packaging option (typically a lead-free/RoHS-compliant SOIC-16 in a defined reel or tube quantity). Both share the same electrical specifications and die.

Are the AM26C31ID and AM26C31IDE4 electrically interchangeable?

Yes. Both devices are the same AM26C31 quad differential line driver with identical electrical characteristics, including ±7 V common-mode range, 3-state outputs, and TIA/EIA-422-B and ITU-T V.11 compliance. They differ only in the manufacturer's packaging/ordering suffix, not in electrical performance.

What package do the AM26C31ID and AM26C31IDE4 use?

Both parts are offered in a 16-pin SOIC (D) package. The "D" in the part number designates the SOIC-16 package, and the "E4" suffix on the AM26C31IDE4 indicates the lead-free (RoHS-compliant) plating option per Texas Instruments ordering conventions.

What are the key electrical specifications shared by both devices?

Both are quad differential line drivers compliant with TIA/EIA-422-B and ITU-T V.11, operating from a single 5 V supply, with 3-state outputs, ±7 V common-mode output range, and output drive capable of meeting RS-422 requirements. They are specified for operation over the standard industrial temperature range.

Can the AM26C31IDE4 be used as a drop-in replacement for the AM26C31ID?

Yes, provided the PCB footprint and assembly process accept the SOIC-16 package and the lead-free (E4) finish is compatible with the board's soldering process. Since both are the same die in the same package family, they are drop-in compatible electrically and mechanically.

Do both parts meet RoHS requirements?

The AM26C31IDE4 carries the "E4" suffix, which denotes a lead-free/RoHS-compliant finish per Texas Instruments ordering nomenclature. The AM26C31ID is the standard (non-E4) ordering variant; designers should confirm the specific RoHS status of the exact orderable part number against the manufacturer's datasheet or product page before finalizing.

What applications are both devices suitable for?

Both are intended for balanced differential data transmission over twisted-pair or parallel-wire cables, including RS-422/RS-485-style interfaces, industrial control, motor control, and point-to-point data links. They are not intended for use as RS-485 multipoint transceivers without additional consideration of the driver's output characteristics.