AM26LS32ACDR vs AM26LS32ACDG4

This in-depth comparison of the AM26LS32ACDR and AM26LS32ACDG4 provides valuable insights into their specifications and key features. We cover important factors in detail, including RoHS compliance, REACH status, series, mounting style, package type, and other relevant characteristics. Presenting the differences side by side simplifies component selection, making it easier for you to select the best option for your specific application.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AM26LS32ACDR and AM26LS32ACDG4 are functionally equivalent quad differential line receivers from the same manufacturer, sharing identical electrical characteristics, logic function, and supply requirements. The only distinction is the packaging format—tape-and-reel versus tube—making them interchangeable for design purposes, with the choice driven solely by assembly and procurement preferences.

Function and Logic Family High match
Electrical Specifications High match
Package and Pinout High match
Packaging Format Validation required

Parts at a glance

Part A

AM26LS32ACDR

Texas Instruments

Lifecycle
Active
Stock
2449 PCS
Package
SOIC-16
Series
Interface - Drivers, Receivers, Transceivers
Part B

AM26LS32ACDG4

Texas Instruments

Lifecycle
Active
Stock
5692 PCS
Package
SOIC-16
Series
Interface - Drivers, Receivers, Transceivers

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AM26LS32ACDR AM26LS32ACDG4 Why it matters
Function Quadruple differential line receiver Quadruple differential line receiver Both devices perform the same core function, so they are functionally interchangeable in a circuit.
Number of Receivers 4 4 The receiver count must match the number of differential signal channels required by the design.
Supply Voltage (VCC) 5 V (4.75 V to 5.25 V) 5 V (4.75 V to 5.25 V) The operating supply range determines compatibility with the system power rail.
Input Type Differential Differential Differential inputs provide noise immunity and are required for RS-422/RS-485 style signaling.
Output Type 3-state (tri-state) 3-state (tri-state) Tri-state outputs allow multiple receivers to share a common bus without contention.
Operating Temperature Range -40 °C to 85 °C -40 °C to 85 °C The temperature range must cover the application's environmental conditions for reliable operation.
Package / Mounting SOIC-16, surface mount (tape and reel) SOIC-16, surface mount (tube/rail) The package footprint is identical, but the packing format differs, which affects assembly line handling and reordering.
Packaging / Ordering Suffix R suffix (large reel) G4 suffix (green/RoHS, tube) The suffix indicates reel versus tube packaging and RoHS status, which matters for procurement and automated placement.
RoHS Compliance RoHS compliant RoHS compliant (G4 designation) Both meet RoHS requirements, so environmental compliance is not a differentiator between them.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AM26LS32ACDR AM26LS32ACDG4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Type Receiver Receiver
Protocol RS422, RS423 RS422, RS423
Number of Drivers/Receivers 0/4 0/4
Receiver Hysteresis 50 mV 50 mV
Voltage - Supply 4.75V ~ 5.25V 4.75V ~ 5.25V
Operating Temperature 0°C ~ 70°C 0°C ~ 70°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What is the difference between the AM26LS32ACDR and the AM26LS32ACDG4?

Both devices are electrically identical quad differential line receivers from Texas Instruments. The difference is the ordering suffix: the AM26LS32ACDR is supplied in tape-and-reel packaging (SOIC-16, 2500 units per reel), while the AM26LS32ACDG4 is supplied in tube/rail packaging (SOIC-16) and carries the "G4" green-material designation. Functionally and parametrically they are the same device.

Are the AM26LS32ACDR and AM26LS32ACDG4 functionally interchangeable?

Yes. Both are the same AM26LS32AC die in the same 16-pin SOIC (D) package, with identical pinout, electrical characteristics, and operating temperature range. They differ only in shipping packaging and the G4 green-material marking, so they can be used interchangeably in the same PCB footprint.

What is the function of the AM26LS32ACDR/AM26LS32ACDG4?

These are quad differential line receivers designed to meet the requirements of TIA/EIA-422-B, TIA/EIA-423-B, and ITU Recommendation V.10/V.11. Each device contains four independent receivers with three-state outputs, intended for balanced and unbalanced digital data transmission over twisted-pair or parallel-wire lines.

What supply voltage and temperature range do these devices support?

Both devices operate from a single 5 V nominal supply (VCC = 5 V ±5%) and are specified over the standard commercial temperature range of 0°C to 70°C. The "C" in the part number denotes the commercial temperature grade.

What package do the AM26LS32ACDR and AM26LS32ACDG4 use?

Both are offered in the 16-pin SOIC package, designated by the "D" suffix in the part number. The AM26LS32ACDR is the tape-and-reel version, and the AM26LS32ACDG4 is the tube/rail version with the G4 green-material designation.

Do these receivers have three-state outputs?

Yes. Each of the four receivers in the AM26LS32ACDR and AM26LS32ACDG4 has a three-state output controlled by a common enable pin, allowing the outputs to be placed in a high-impedance state for bus-oriented applications.

What input sensitivity and common-mode range do these receivers provide?

The AM26LS32AC family provides ±200 mV input sensitivity over a common-mode range of −7 V to +7 V, which is consistent with the TIA/EIA-422-B and V.11 specifications for balanced differential data transmission.

Which one should I order for automated assembly versus prototyping?

For automated SMT assembly lines, the AM26LS32ACDR tape-and-reel packaging is typically preferred. For prototyping or low-volume hand assembly, the AM26LS32ACDG4 tube/rail packaging may be more convenient. Both use the identical SOIC-16 footprint and are electrically equivalent.