Specifications
| Attribute | Value |
| Supplier | Broadcom Limited |
| Package / Case | Tube |
| Part Status | Active |
| Amplifier Type | Isolation |
| Number of Circuits | 1 |
| Output Type | Differential |
| -3 dB Bandwidth | 100 kHz |
| Voltage - Input Offset | 300 µV |
| Supply Current | 11mA |
| Current - Output / Channel | 18.6 mA |
| Voltage - Supply Span(Min) | 4.5 V |
| Voltage - Supply Span(Max) | 5.5 V |
| Operating Temperature | -40°C ~ 85°C |
| Mounting Type | Surface Mount |
Overview
Description
ACPL-C784-000E is a single-channel optically isolated digital isolator (from Broadcom/Avago). It transfers a digital signal across a galvanic isolation barrier by using an input LED and a photodetector with a built‑in logic receiver, delivering a TTL/CMOS‑compatible output. The device is designed to isolate microcontroller or logic interfaces from high‑voltage or noisy sections in power converters, motor drives, and industrial controls. Key points:
- 1-channel isolated logic gate with standard output (TTL/CMOS compatible)
- Internal LED–photodetector with robust isolation between input and output
- Suitable for 3.3 V or 5 V output-side supplies
- Typical applications: MCU interfaces, isolated sensors and data links, and digital isolation in power and motor control
- Available in common packages (e.g., SO‑8, DIP‑8)
For exact electrical specs (input current, CTR, VISO, propagation delay, and operating conditions), refer to the ACPL-C784-000E datasheet.
- 1-channel isolated logic gate with standard output (TTL/CMOS compatible)
- Internal LED–photodetector with robust isolation between input and output
- Suitable for 3.3 V or 5 V output-side supplies
- Typical applications: MCU interfaces, isolated sensors and data links, and digital isolation in power and motor control
- Available in common packages (e.g., SO‑8, DIP‑8)
For exact electrical specs (input current, CTR, VISO, propagation delay, and operating conditions), refer to the ACPL-C784-000E datasheet.
Equivalent
Equivalent parts are other high-speed optocouplers with the same pinout/specs. The main cross is the Avago/Broadcom HCPL-C784-000E (or HCPL-C784 family); ACPL-C784-000E is typically the same device under another prefix. For exact cross-references, specify isolation voltage, CTR and speed, or use DigiKey/Mouser cross-reference tools.
Features
ACPL-C784-000E is a quad-channel Photologic digital optocoupler. Key features:
- 4 independent LED inputs with 4 totem-pole logic outputs
- High-speed digital isolation (Photologic) for TTL/CMOS compatible logic
- Isolation voltage: 5 kV rms (60 s)
- Supply voltage: Vcc = 4.5 to 5.5 V
- Common-mode transient immunity: ≥25 kV/µs (min)
- Propagation delay: typically around 0.6 µs (up to ≈1 µs range, depending on conditions)
- Input LED forward current per channel: typically 5 mA (advantageous CTR at moderate LED drive)
- Temperature range: -40 °C to +125 °C
- Pb-free/RoHS compliant
- Package options: 16-pin SOIC/DIP variants
Applications: isolated data transmission in industrial controls, motor drives, power supplies, and other safety-critical digital interfaces.
- 4 independent LED inputs with 4 totem-pole logic outputs
- High-speed digital isolation (Photologic) for TTL/CMOS compatible logic
- Isolation voltage: 5 kV rms (60 s)
- Supply voltage: Vcc = 4.5 to 5.5 V
- Common-mode transient immunity: ≥25 kV/µs (min)
- Propagation delay: typically around 0.6 µs (up to ≈1 µs range, depending on conditions)
- Input LED forward current per channel: typically 5 mA (advantageous CTR at moderate LED drive)
- Temperature range: -40 °C to +125 °C
- Pb-free/RoHS compliant
- Package options: 16-pin SOIC/DIP variants
Applications: isolated data transmission in industrial controls, motor drives, power supplies, and other safety-critical digital interfaces.
Pinout
- Pin count: 8 pins (8-pin package).
- Function: Analog optocoupler (isolated amplifier) that provides galvanic isolation between input and output while passing an analog signal.
- Function: Analog optocoupler (isolated amplifier) that provides galvanic isolation between input and output while passing an analog signal.
Manufacturer
- Manufacturer: Broadcom Inc. (Avago Technologies is the original brand name; now Broadcom)
- What kind of company: A multinational American semiconductor company that designs, develops, and supplies a wide range of semiconductor devices and related infrastructure software.
- What kind of company: A multinational American semiconductor company that designs, develops, and supplies a wide range of semiconductor devices and related infrastructure software.
Application
ACPL-C784-000E is a high‑speed optocoupler (Photologic) with galvanic isolation. Typical applications include:
- Isolated gate drive for IGBTs/MOSFETs in switch‑mode power supplies, motor drives, and inverters
- Isolated feedback and data paths in SMPS
- Industrial automation I/O interfaces and PLCs
- Sensor/measurement front ends requiring galvanic isolation
- Safety‑critical medical or telecom equipment needing isolation and EMI robustness
- Isolated gate drive for IGBTs/MOSFETs in switch‑mode power supplies, motor drives, and inverters
- Isolated feedback and data paths in SMPS
- Industrial automation I/O interfaces and PLCs
- Sensor/measurement front ends requiring galvanic isolation
- Safety‑critical medical or telecom equipment needing isolation and EMI robustness
Package
8-pin SOIC (surface-mount) package; RoHS lead-free (-E).
