Specifications
| Attribute | Value |
| Package / Case | Tube |
| Series | Automotive, AEC-Q100 |
| Part Status | Obsolete |
| Switch Type | General Purpose |
| Number of Outputs | 1 |
| Ratio - Input: Output | 1:1 |
| Output Configuration | High Side |
| Output Type | N-Channel |
| Interface | On/Off |
| Voltage - Load | 6V ~ 35V |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Current - Output (Max) | 2A |
| Rds On (Typ) | 80mOhm |
| Input Type | Non-Inverting |
| Features | Auto Restart |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Operating Temperature | -40°C ~ 150°C (TJ) |
| Mounting Type | Surface Mount |
| Supplier Device Package | PG-DSO-8-906 |
Overview
Description
"Introduction to AUIPS7091G" likely refers to a specific course or module, possibly within a university or educational institution. Without further context, it's not possible to provide precise details about this course. However, the course code AUIPS7091G suggests it might be a specialized or advanced-level course, possibly at the graduate level, given the alphanumeric structure often used in academia.
Typically, an "Introduction" course would cover foundational concepts, principles, and techniques relevant to the subject matter indicated by the course code. It could include lectures, discussions, and practical applications to give students a comprehensive overview of the topic. Students might engage in readings, projects, and assessments to solidify their understanding.
If you have access to a syllabus or course description, it would provide more specific information about the topics covered, learning objectives, and any prerequisites needed. For detailed insights, you should contact the relevant department or instructor offering the course.
Typically, an "Introduction" course would cover foundational concepts, principles, and techniques relevant to the subject matter indicated by the course code. It could include lectures, discussions, and practical applications to give students a comprehensive overview of the topic. Students might engage in readings, projects, and assessments to solidify their understanding.
If you have access to a syllabus or course description, it would provide more specific information about the topics covered, learning objectives, and any prerequisites needed. For detailed insights, you should contact the relevant department or instructor offering the course.
Equivalent
The AUIPS7091G is a smart high-side switch from the automotive-grade line by Infineon (formerly International Rectifier). Equivalent products include:
1. BTS6143D (Infineon) - High-side power switch.
2. VNQ5050AK-E (STMicroelectronics) - Quad-channel high-side driver.
3. BUK7Y12-40EX (Nexperia) - Trench MOSFET.
4. IPS6041GPBF (Infineon) - Smart high-side switch.
Check specific datasheets for compatibility in terms of electrical parameters and pin configurations.
1. BTS6143D (Infineon) - High-side power switch.
2. VNQ5050AK-E (STMicroelectronics) - Quad-channel high-side driver.
3. BUK7Y12-40EX (Nexperia) - Trench MOSFET.
4. IPS6041GPBF (Infineon) - Smart high-side switch.
Check specific datasheets for compatibility in terms of electrical parameters and pin configurations.
Features
The AUIPS7091G is a fully protected intelligent power switch designed for automotive applications. Key features include:
1. Voltage Range: Operates within a wide input voltage range, typically from 6V to 28V, suitable for automotive environments.
2. Current Handling: Capable of handling high current loads, with a maximum continuous current capability, usually around 6A to 10A.
3. Protection Mechanisms: Includes multiple protection features such as over-temperature protection, short-circuit protection, and over-current protection to enhance reliability and durability.
4. Diagnostics: Provides diagnostic feedback for open load and short-circuit conditions, enabling better fault detection and system monitoring.
5. Control Interface: Typically includes an input control interface compatible with 3.3V and 5V logic levels, allowing easy integration with microcontrollers.
6. Efficiency: Designed for low power dissipation, contributing to higher efficiency and reduced heat generation.
7. Package: Available in surface-mount packages that facilitate easy integration into compact circuit designs.
These features make the AUIPS7091G an ideal choice for controlling various electrical loads in automotive systems.
1. Voltage Range: Operates within a wide input voltage range, typically from 6V to 28V, suitable for automotive environments.
2. Current Handling: Capable of handling high current loads, with a maximum continuous current capability, usually around 6A to 10A.
3. Protection Mechanisms: Includes multiple protection features such as over-temperature protection, short-circuit protection, and over-current protection to enhance reliability and durability.
4. Diagnostics: Provides diagnostic feedback for open load and short-circuit conditions, enabling better fault detection and system monitoring.
5. Control Interface: Typically includes an input control interface compatible with 3.3V and 5V logic levels, allowing easy integration with microcontrollers.
6. Efficiency: Designed for low power dissipation, contributing to higher efficiency and reduced heat generation.
7. Package: Available in surface-mount packages that facilitate easy integration into compact circuit designs.
These features make the AUIPS7091G an ideal choice for controlling various electrical loads in automotive systems.
Pinout
The AUIPS7091G is a high-side intelligent power switch primarily used for automotive applications. It typically comes in a D-Pak (TO-252) package and has three pins. Here is a brief overview of the pin functions:
1. VCC (Pin 1): This is the supply voltage input. It connects to the positive side of the power supply. The device operates over a wide voltage range, making it suitable for various automotive systems.
2. OUT (Pin 2): This pin is the output connection to the load. It allows the controlled power delivery to the connected load, functioning as a switch to turn the load on or off based on the input signal.
3. GND (Pin 3): This is the ground pin and is connected to the negative side of the supply voltage. It provides a reference point for the internal circuitry and is crucial for proper operation.
The AUIPS7091G integrates protection features like over-current, over-temperature, ESD, and short-circuit protection, making it robust for automotive environments.
1. VCC (Pin 1): This is the supply voltage input. It connects to the positive side of the power supply. The device operates over a wide voltage range, making it suitable for various automotive systems.
2. OUT (Pin 2): This pin is the output connection to the load. It allows the controlled power delivery to the connected load, functioning as a switch to turn the load on or off based on the input signal.
3. GND (Pin 3): This is the ground pin and is connected to the negative side of the supply voltage. It provides a reference point for the internal circuitry and is crucial for proper operation.
The AUIPS7091G integrates protection features like over-current, over-temperature, ESD, and short-circuit protection, making it robust for automotive environments.
Manufacturer
The AUIPS7091G is manufactured by Infineon Technologies AG. Infineon is a German semiconductor manufacturer that designs, develops, and produces a wide range of semiconductor solutions. The company is known for its expertise in power semiconductors, microcontrollers, sensors, and security solutions, serving various industries including automotive, industrial, and consumer electronics. Infineon’s products are crucial for applications in energy efficiency, mobility, and security.
Application
The AUIPS7091G is a smart power switch integrated circuit designed for automotive and industrial applications. Its main application areas include:
1. Automotive Systems: Used in power distribution modules, body control modules, and electronic control units for efficient power management and protection against overcurrent, overtemperature, and voltage spikes.
2. Industrial Automation: Employed in controlling and protecting actuators, motors, and solenoids in industrial equipment.
3. Consumer Electronics: Utilized in devices requiring reliable power management and protection features.
4. Power Management: Ideal for applications needing efficient load switching and protection to enhance system reliability and longevity.
Its robust design ensures high performance in environments with demanding electrical and thermal conditions.
1. Automotive Systems: Used in power distribution modules, body control modules, and electronic control units for efficient power management and protection against overcurrent, overtemperature, and voltage spikes.
2. Industrial Automation: Employed in controlling and protecting actuators, motors, and solenoids in industrial equipment.
3. Consumer Electronics: Utilized in devices requiring reliable power management and protection features.
4. Power Management: Ideal for applications needing efficient load switching and protection to enhance system reliability and longevity.
Its robust design ensures high performance in environments with demanding electrical and thermal conditions.
Package
The AUIPS7091G is a smart high-side switch from Infineon Technologies, typically housed in a DPAK (TO-252) package. This package type is surface-mount, providing efficient thermal management and is commonly used for automotive and industrial applications.
