Specifications
| Attribute | Value |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| Series | PROFET® |
| ProductStatus | Obsolete |
| SwitchType | General Purpose |
| NumberofOutputs | 1 |
| Ratio-Input:Output | 1:1 |
| OutputConfiguration | High Side |
| OutputType | N-Channel |
| Interface | On/Off |
| Voltage-Load | 4.75V ~ 41V |
| Voltage-Supply(Vcc/Vdd) | Not Required |
| Current-Output(Max) | 8.8A |
| RdsOn(Typ) | 35mOhm |
| InputType | Non-Inverting |
| Features | Status Flag |
| FaultProtection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| OperatingTemperature | -40°C ~ 150°C (TJ) |
| MountingType | Surface Mount |
| SupplierDevicePackage | PG-TO263-5-2 |
Overview
Description
BTS436L2G is a course code that likely represents a specific class or module, typically within a college or university curriculum. While detailed information about BTS436L2G is not available in public data, course codes generally follow a structure where:
- "BTS" could denote the department or subject area, such as Business, Technology, or Science.
- "436" might indicate the course level; higher numbers often signify advanced or specialized topics.
- "L2G" could refer to a particular section, lab group, or format of the course.
For precise details, such as the course title, syllabus, or objectives, consult the academic institution's course catalog or contact the department offering the course. This will provide information on the content, prerequisites, and the skills or knowledge students can expect to gain from BTS436L2G.
- "BTS" could denote the department or subject area, such as Business, Technology, or Science.
- "436" might indicate the course level; higher numbers often signify advanced or specialized topics.
- "L2G" could refer to a particular section, lab group, or format of the course.
For precise details, such as the course title, syllabus, or objectives, consult the academic institution's course catalog or contact the department offering the course. This will provide information on the content, prerequisites, and the skills or knowledge students can expect to gain from BTS436L2G.
Equivalent
The BTS436L2G is a Smart High-Side Power Switch made by Infineon Technologies. Equivalent products may include:
1. Infineon BTS442E2 Another high-side switch with similar functionality.
2. STMicroelectronics VNQ5E050MK: A quad-channel high-side driver.
3. Texas Instruments TPS1H100-Q1: A single-channel high-side switch with diagnostics.
4. NXP Semiconductors 33982: Similar high-side switch for automotive applications.
Always verify the specifications to ensure compatibility with your requirements.
1. Infineon BTS442E2 Another high-side switch with similar functionality.
2. STMicroelectronics VNQ5E050MK: A quad-channel high-side driver.
3. Texas Instruments TPS1H100-Q1: A single-channel high-side switch with diagnostics.
4. NXP Semiconductors 33982: Similar high-side switch for automotive applications.
Always verify the specifications to ensure compatibility with your requirements.
Features
The BTS436L2G is a power switch from Infineon Technologies, designed for automotive and industrial applications. Here are its key features:
1. Single Channel High-Side Switch: It operates as a single channel switch controlling the connection to the positive supply voltage.
2. Nominal Operating Voltage: Designed for use in 12V systems, but can handle a wide operating voltage range.
3. Current Capability: Supports a continuous current of up to 21A.
4. Protection Features: Includes protection against over-temperature, over-current, and short-circuit conditions.
5. Diagnostic Feedback: Provides diagnostic feedback capabilities, allowing for fault detection and reporting.
6. Low Power Consumption: Optimized for low power consumption in standby mode.
7. Robust Design: Built to withstand harsh automotive environments, including wide temperature ranges.
8. Integrated Features: Includes an integrated clamp for inductive load switching and self-resetting over-temperature protection.
These features make the BTS436L2G suitable for various applications, such as in automotive lighting, heating systems, and other electronically controlled units requiring reliable high-side switching.
1. Single Channel High-Side Switch: It operates as a single channel switch controlling the connection to the positive supply voltage.
2. Nominal Operating Voltage: Designed for use in 12V systems, but can handle a wide operating voltage range.
3. Current Capability: Supports a continuous current of up to 21A.
4. Protection Features: Includes protection against over-temperature, over-current, and short-circuit conditions.
5. Diagnostic Feedback: Provides diagnostic feedback capabilities, allowing for fault detection and reporting.
6. Low Power Consumption: Optimized for low power consumption in standby mode.
7. Robust Design: Built to withstand harsh automotive environments, including wide temperature ranges.
8. Integrated Features: Includes an integrated clamp for inductive load switching and self-resetting over-temperature protection.
These features make the BTS436L2G suitable for various applications, such as in automotive lighting, heating systems, and other electronically controlled units requiring reliable high-side switching.
Pinout
The BTS436L2G is a smart high-side power switch commonly used in automotive and industrial applications. It is manufactured by Infineon Technologies. The device is typically housed in a TO-252 (DPAK) package, which features three pins.
1. Pin 1 (IN): This is the input pin used to control the device. Applying a high signal to this pin activates the switch, allowing current to flow from the drain to the source.
2. Pin 2 (Vbb): This is the supply voltage pin. It connects to the positive side of the power supply, providing the necessary voltage for the operation of the switch.
3. Pin 3 (OUT): This is the output pin connected to the load. When the switch is activated, current flows through this pin to power the connected load.
The BTS436L2G is designed to handle high currents and integrate protection features such as overtemperature, overcurrent, and short-circuit protection, making it robust and reliable for high-side switching applications.
1. Pin 1 (IN): This is the input pin used to control the device. Applying a high signal to this pin activates the switch, allowing current to flow from the drain to the source.
2. Pin 2 (Vbb): This is the supply voltage pin. It connects to the positive side of the power supply, providing the necessary voltage for the operation of the switch.
3. Pin 3 (OUT): This is the output pin connected to the load. When the switch is activated, current flows through this pin to power the connected load.
The BTS436L2G is designed to handle high currents and integrate protection features such as overtemperature, overcurrent, and short-circuit protection, making it robust and reliable for high-side switching applications.
Manufacturer
The BTS436L2G is manufactured by Infineon Technologies. Infineon is a German semiconductor manufacturer that specializes in designing and producing a wide range of semiconductors, including microcontrollers, sensors, power semiconductors, and security solutions. The company caters to various industries, including automotive, industrial, consumer electronics, and communications. Infineon is known for its focus on energy efficiency, mobility, and security in its product offerings.
Application
The BTS436L2G is a smart high-side power switch commonly used in automotive and industrial applications. Its key application areas include load driving for vehicle lighting systems, such as headlights and taillights, and controlling motors or solenoids in automotive systems. It is also utilized in industrial automation for switching DC loads, managing power distribution, and protecting circuits against overcurrent, overvoltage, and overtemperature conditions. Additionally, it can be used for driving capacitive, inductive, or resistive loads in various electronic control units (ECUs), ensuring efficient load management and fault diagnostics.
Package
The BTS436L2G is packaged in a TO-252-5 package, also known as a DPAK-5. This type of packaging is designed for surface mounting on a circuit board and is commonly used for power transistors and other high-power applications.
