CD4060BM96

The CD4060BM96 is a 14-stage binary ripple counter with an integrated oscillator, part of the CD4000B series from Texas Instruments. It is designed for use in a wide range of digital and timing applications. The device consists of an oscillator section, a 14-stage ripple carry binary counter, and an array of flip-flops. The CD4060BM96 can be configured to provide various frequency division outputs, with the oscillator frequency determined by external resistor and capacitor components. It features independent reset functionality, enabling the counter to be reset to zero.
Key features include wide operating voltage range (3V to 15V), low power consumption, and high noise immunity. The counter provides multiple output pins from various stages of the flip-flops, allowing for flexible use in frequency division and time delay applications. The device is available in several package types, making it suitable for diverse circuit designs. It's commonly used in clocks, timers, frequency dividers, and other digital logic applications where a reliable binary counter is required.

The CD4060BM96 is a 14-stage binary ripple counter with a built-in oscillator. Equivalent products include the CD4060BE, HEF4060B, MC14060BCP, and TC4060BP. These alternatives are generally pin-compatible and provide similar functionality, making them suitable replacements in most applications. Always verify datasheets to ensure compatibility with your specific circuit requirements.

The CD4060BM96 is a 14-stage ripple-carry binary counter/divider and oscillator from the CD4000 series. It features a built-in oscillator that can be configured with external resistors and capacitors, allowing it to function as a clock generator. The device provides 10 buffered outputs, each representing a stage of the binary counter, from \( Q_4 \) to \( Q_{13} \). The counter advances on the negative edge of the clock signal.
Key features include:
- Wide supply voltage range: 3V to 15V.
- Low power consumption due to CMOS technology.
- High noise immunity.
- Buffered outputs to drive multiple loads.
- Oscillator with external resistor and capacitor for frequency control.
- Master reset functionality to clear the counter.
- High fan-out capability.
- Typical propagation delay: 200ns at 5V.

These features make the CD4060BM96 suitable for various timing applications, frequency division, and clock generation tasks in digital circuits.

The CD4060BM96 is a 14-stage ripple-carry binary counter/divider and oscillator IC. It typically comes in a 16-pin package. Here’s a brief overview of its pin functions:
1. Pin 1 and 2: The oscillator pins. Pin 1 (OSC IN) is the input for external clock or oscillator.
2. Pin 3 (Q4) to Pin 7 (Q10): These are the counter output pins.
3. Pin 8 (VSS): Ground pin.
4. Pin 9 (Q11), Pin 10 (Q12), Pin 11 (Q13): Additional counter output pins.
5. Pin 12 (Q14): The highest order counter output pin.
6. Pin 13 (RESET): Reset pin, used to reset the counter to zero.
7. Pin 14 and 15: The other oscillator pins. Pin 14 is OSC OUT, and Pin 15 (OSC) is connected to the timing resistor/capacitor.
8. Pin 16 (VDD): Positive supply voltage pin.
The CD4060BM96 is often used in applications requiring frequency division or time delay, due to its integrated oscillator and binary counter capabilities.

The CD4060BM96 is manufactured by Texas Instruments, an American technology company that designs and manufactures semiconductors and integrated circuits. Founded in 1930 and headquartered in Dallas, Texas, Texas Instruments is one of the largest semiconductor companies globally. The company specializes in developing analog chips and embedded processors that are used in a broad range of electronic devices and applications, including consumer electronics, automotive systems, industrial machinery, and communication technologies. Texas Instruments is known for its commitment to innovation and quality in the electronics industry.

The CD4060BM96 is a CMOS-based integrated circuit used primarily as a 14-stage ripple-carry binary counter/divider and oscillator. Its application areas include clock generation, frequency division, and timing applications. It is commonly used in digital watches, timers, clocks, frequency counters, and LED flashers. The built-in oscillator allows it to be used in standalone timing applications without needing an external clock input. Additionally, it is employed in circuits requiring long time delays or frequency scaling, such as in industrial automation systems, consumer electronics, and remote controls. Its low power consumption and high noise immunity make it suitable for battery-operated devices.

The CD4060BM96 is a 14-stage ripple-carry binary counter/divider and oscillator with an SOIC-16 package type. The "SOIC" (Small Outline Integrated Circuit) package is a surface-mount package that allows for compact and efficient board design.