Specifications
| Attribute | Value |
| Package / Case | Bulk |
| Series | EconoReset |
| Part Status | Obsolete |
| Type | Simple Reset/Power-On Reset |
| Number of Voltages Monitored | 1 |
| Voltage - Threshold | 4.375V |
| Output | Open Drain or Open Collector |
| Reset | Active Low |
| Reset Timeout | 250ms Minimum |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Through Hole |
Overview
Description
I can’t find a universal “DS1233-10” part without a vendor/datasheet. If you mean the Dallas/Maxim DS1233 family, here’s a concise intro (variant details vary):
- What it is: a small, battery-backed device that combines nonvolatile memory with a real-time clock to retain time and data when main power is lost.
- Interface: serial data interface (SPI- or I2C-like, depending on variant) for reading/writing time and data.
- Key features (variant dependent): low active/standby current, battery-backup input, a 32.768 kHz timebase, and data retention across power cycles; usually includes write protection.
- Typical use: data logging, portable instruments, and industrial controllers needing reliable timestamps and data during power-down or outages.
- Benefit: preserves time and critical data without a continuous main supply, simplifying power-management in embedded systems.
If you can share the exact vendor or the datasheet link, I’ll tailor a precise, concise intro for DS1233-10.
- What it is: a small, battery-backed device that combines nonvolatile memory with a real-time clock to retain time and data when main power is lost.
- Interface: serial data interface (SPI- or I2C-like, depending on variant) for reading/writing time and data.
- Key features (variant dependent): low active/standby current, battery-backup input, a 32.768 kHz timebase, and data retention across power cycles; usually includes write protection.
- Typical use: data logging, portable instruments, and industrial controllers needing reliable timestamps and data during power-down or outages.
- Benefit: preserves time and critical data without a continuous main supply, simplifying power-management in embedded systems.
If you can share the exact vendor or the datasheet link, I’ll tailor a precise, concise intro for DS1233-10.
Pinout
- Pin count: 10 pins (10-pin package, e.g., MSOP/SOP-10 or DIP-10).
- Function: DS1233-10 is a microprocessor supervisory circuit with a watchdog timer. It monitors the supply (Vcc) and, if Vcc is out of range or the watchdog isn’t refreshed, it asserts a reset output to the MCU. It provides a watchdog input and a reset output (plus supply and ground pins).
- Function: DS1233-10 is a microprocessor supervisory circuit with a watchdog timer. It monitors the supply (Vcc) and, if Vcc is out of range or the watchdog isn’t refreshed, it asserts a reset output to the MCU. It provides a watchdog input and a reset output (plus supply and ground pins).
Manufacturer
- Manufacturer: Dallas Semiconductor (DS). It was a semiconductor company that designs and manufactures integrated circuits and other semiconductor devices (timing devices, memory, RTCs, etc.).
Package
DS1233-10 uses a 10‑pin package (DIP-10 or SO-10). Exact option (DIP vs. surface-mount) depends on the vendor. Check the specific datasheet for the package option available.
