Specifications
| Attribute | Value |
| Package | Tube |
| ProductStatus | Active |
| DrivenConfiguration | Low-Side |
| ChannelType | Single |
| NumberofDrivers | 1 |
| GateType | IGBT, N-Channel, P-Channel MOSFET |
| Voltage-Supply | 4.5V ~ 35V |
| LogicVoltage-VILVIH | 0.8V, 3V |
| Current-PeakOutput(SourceSink) | 9A, 9A |
| InputType | Non-Inverting |
| Rise/FallTime(Typ) | 22ns, 15ns |
| OperatingTemperature | -55°C ~ 150°C (TJ) |
| MountingType | Through Hole |
| Package/Case | 8-DIP (0.300, 7.62mm) |
Overview
Description
IXDN609PI is a high-speed, high-current MOSFET gate driver in an 8-pin Plastic DIP. It takes a logic input (TTL/CMOS compatible, can be 3.3 V) and drives a power MOSFET/IGBT gate with a fast, rail-to-rail output. Key use: drive power switches in switching regulators, DC-DC converters, motor drivers, and Class-D amplifiers. Features include a totem-pole output capable of quickly charging/discharging gate capacitance, isolation from the control logic, and a single-supply operation with a broad Vcc range (check datasheet for exact values). Typical external components are minimal (gate resistor, decoupling capacitor). Benefits include reduced switching losses and easier control of high‑power stages. For exact pinout, voltage range, timing, and protection features, consult the IXDN609PI datasheet.
Features
IXDN609PI is a high-speed, high-current MOSFET gate driver. Key features:
- High peak source/sink current to rapidly charge/discharge MOSFET gates
- Single-channel, totem-pole gate drive
- TTL/CMOS-compatible input
- Wide supply range with logic-level operation
- Protection: undervoltage lockout, overcurrent/short-circuit protection, and thermal shutdown
- Current limiting for short-circuit protection
- Low output impedance and matched turn-on/turn-off characteristics
- Package: 8-pin plastic DIP (PI denotes plastic DIP)
- Suitable for driving power MOSFETs in bridge, half-bridge, or switching power-supply circuits
For exact electrical specs (voltage ranges, current, and timing), please consult the official datasheet.
- High peak source/sink current to rapidly charge/discharge MOSFET gates
- Single-channel, totem-pole gate drive
- TTL/CMOS-compatible input
- Wide supply range with logic-level operation
- Protection: undervoltage lockout, overcurrent/short-circuit protection, and thermal shutdown
- Current limiting for short-circuit protection
- Low output impedance and matched turn-on/turn-off characteristics
- Package: 8-pin plastic DIP (PI denotes plastic DIP)
- Suitable for driving power MOSFETs in bridge, half-bridge, or switching power-supply circuits
For exact electrical specs (voltage ranges, current, and timing), please consult the official datasheet.
Pinout
- Pin count: 8 pins (PDIP-8).
- Function: High-speed, non-inverting MOSFET gate driver with high peak output current (about 9 A) to drive power MOSFET gates from TTL/CMOS inputs (push-pull output, supply typically 4.5–15 V).
- Function: High-speed, non-inverting MOSFET gate driver with high peak output current (about 9 A) to drive power MOSFET gates from TTL/CMOS inputs (push-pull output, supply typically 4.5–15 V).
Manufacturer
Manufacturer: IXYS Corporation (now part of Vishay Intertechnology).
What kind of company: A global semiconductor company that designs and manufactures power semiconductors and related integrated circuits (e.g., gate drivers, MOSFETs, IGBTs).
What kind of company: A global semiconductor company that designs and manufactures power semiconductors and related integrated circuits (e.g., gate drivers, MOSFETs, IGBTs).
Application
IXDN609PI is a high-current, low-impedance gate driver used to drive power MOSFETs and IGBTs. Common application areas include:
- Gate drive for switch‑mode power supplies, DC–DC converters, and DC–AC inverters.
- Motor control and drive circuits (BLDC/PMSM, stepper) needing fast turn‑on/turn‑off.
- High‑speed PWM stages in solar inverters, UPS, and industrial drives.
- Logic-to-power buffering/level shifting to drive large gate capacitances from TTL/CMOS controllers.
- Gate drive for switch‑mode power supplies, DC–DC converters, and DC–AC inverters.
- Motor control and drive circuits (BLDC/PMSM, stepper) needing fast turn‑on/turn‑off.
- High‑speed PWM stages in solar inverters, UPS, and industrial drives.
- Logic-to-power buffering/level shifting to drive large gate capacitances from TTL/CMOS controllers.
Package
It’s an 8‑pin Plastic DIP (PDIP) through‑hole package.
