Specifications
| Attribute | Value |
| Supplier | Flip Electronics |
| Package / Case | Bulk |
| Series | LPC2900 |
| Part Status | Not For New Designs |
| Core Processor | ARM9® |
| Core Size | 16/32-Bit |
| Speed | 80MHz |
| Connectivity | CANbus, EBI/EMI, LINbus, SPI, UART/USART |
| Peripherals | POR, PWM, WDT |
| Number of I/O | 108 |
| Program Memory Size | 512KB (512K x 8) |
| Program Memory Type | FLASH |
| RAM Size | 80K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.71V ~ 3.6V |
| Data Converters | A/D 16x10b |
| Oscillator Type | Internal |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
Overview
Description
Introduction to LPC2917FBD144/01
The LPC2917FBD144/01 is an NXP LPC29xx microcontroller built around an ARM7TDMI-S core, in a 144‑pin LQFP package (FBD144). The “/01” suffix is the device revision.
Key points
- Core and speed: ARM7TDMI-S core, typically up to about 60 MHz.
- Memory: on‑chip flash and RAM; exact sizes depend on the exact variant (usually hundreds of KB of flash and tens of KB of RAM).
- Peripherals: broad mix including multiple UARTs, SPI, I2C, PWM/timers, and ADC; CAN 2.0B; USB full‑speed on many variants; Ethernet MAC in some configurations.
- Other features: boot ROM, watchdog timer, debug interface (JTAG/SWD).
Packaging and use
- 144‑pin LQFP offering ample GPIOs for embedded control.
- Suitable for automotive, motor control, industrial automation, and other embedded applications requiring moderate performance with rich peripherals.
Development
- Refer to the official datasheet and user manual for exact memory sizes and peripheral set. Tools: NXP support (LPCXpresso, Keil, IAR, etc.).
The LPC2917FBD144/01 is an NXP LPC29xx microcontroller built around an ARM7TDMI-S core, in a 144‑pin LQFP package (FBD144). The “/01” suffix is the device revision.
Key points
- Core and speed: ARM7TDMI-S core, typically up to about 60 MHz.
- Memory: on‑chip flash and RAM; exact sizes depend on the exact variant (usually hundreds of KB of flash and tens of KB of RAM).
- Peripherals: broad mix including multiple UARTs, SPI, I2C, PWM/timers, and ADC; CAN 2.0B; USB full‑speed on many variants; Ethernet MAC in some configurations.
- Other features: boot ROM, watchdog timer, debug interface (JTAG/SWD).
Packaging and use
- 144‑pin LQFP offering ample GPIOs for embedded control.
- Suitable for automotive, motor control, industrial automation, and other embedded applications requiring moderate performance with rich peripherals.
Development
- Refer to the official datasheet and user manual for exact memory sizes and peripheral set. Tools: NXP support (LPCXpresso, Keil, IAR, etc.).
Features
LPC2917FBD144/01 features (concise):
- ARM7TDMI-S 32-bit MCU, up to 60 MHz
- On-chip flash with ISP/IAP (In-System and In-Application Programming)
- On-chip SRAM
- 10/100 Mbps Ethernet MAC with DMA (MII/RMII)
- Serial peripherals: multiple UARTs, plus SPI and I2C
- 12-bit ADC with several channels
- PWM outputs and multiple general-purpose timers
- Real-time clock and watchdog timer
- External memory interface for Flash/SRAM
- Debug support: JTAG/on-chip debug
- Power-saving modes and wake-up options
- Package: 144-pin LQFP
- ARM7TDMI-S 32-bit MCU, up to 60 MHz
- On-chip flash with ISP/IAP (In-System and In-Application Programming)
- On-chip SRAM
- 10/100 Mbps Ethernet MAC with DMA (MII/RMII)
- Serial peripherals: multiple UARTs, plus SPI and I2C
- 12-bit ADC with several channels
- PWM outputs and multiple general-purpose timers
- Real-time clock and watchdog timer
- External memory interface for Flash/SRAM
- Debug support: JTAG/on-chip debug
- Power-saving modes and wake-up options
- Package: 144-pin LQFP
Pinout
- Pin count: 144 pins (LQFP144 package)
- Function: LPC29xx family ARM7TDMI-S based microcontroller with onboard peripherals (e.g., Ethernet MAC/PHY, memory interfaces, timers, etc.). In short: a 144-pin MCU with integrated Ethernet capabilities.
- Function: LPC29xx family ARM7TDMI-S based microcontroller with onboard peripherals (e.g., Ethernet MAC/PHY, memory interfaces, timers, etc.). In short: a 144-pin MCU with integrated Ethernet capabilities.
Manufacturer
- Manufacturer: NXP Semiconductors (formerly Philips Semiconductors).
- What kind of company: A Dutch multinational semiconductor company that designs and manufactures embedded processors, microcontrollers, analog/mixed-signal ICs, and security/connectivity solutions for automotive, industrial, and consumer markets. Headquarters in Eindhoven, Netherlands.
- What kind of company: A Dutch multinational semiconductor company that designs and manufactures embedded processors, microcontrollers, analog/mixed-signal ICs, and security/connectivity solutions for automotive, industrial, and consumer markets. Headquarters in Eindhoven, Netherlands.
Application
Typical application areas for LPC2917FBD144/01:
- Industrial automation and process control
- Motor control and power electronics
- Building/home automation
- Automotive and transportation electronics
- Networking, gateways and fieldbus interfaces
- Medical instrumentation and data acquisition
- Consumer electronics and embedded devices
- Industrial automation and process control
- Motor control and power electronics
- Building/home automation
- Automotive and transportation electronics
- Networking, gateways and fieldbus interfaces
- Medical instrumentation and data acquisition
- Consumer electronics and embedded devices
Package
LPC2917FBD144/01 uses a 144-pin LQFP package (Thin Plastic Quad Flat Package).
