MPC563MZP56

The MPC563MZP56 is an automotive-grade 32‑bit microcontroller from NXP (formerly Freescale) in the MPC56 family. It is built around a Power Architecture e200z core and targets automotive control and body electronics.
Key points
- Integrated memory: on‑chip Flash and RAM.
- Peripherals: multiple serial interfaces (CAN/FlexCAN, UART/SCI, SPI, I2C/LIN), PWM/Motor-control modules, ADCs, timers, and a DMA engine.
- Safety and reliability: features such as ECC/memory protection and watchdogs, with options for automotive safety software stacks and AUTOSAR support depending on the variant.
- Development: supported by traditional tools (CodeWarrior, MCUXpresso/Open tools) and vendor libraries for automotive protocols.
For exact specifications (clock speed, memory sizes, pin/package, safety features), refer to the MPC563MZP56 datasheet and user guide. Typical use cases include engine/powertrain control, body electronics, and industrial motor control.

Equivalents depend on required features (package, flash/RAM, peripherals, speed). Closest internal substitutes are other MPC56x/MPC563xP devices with the same package and memory, or the SPC56EL/SPC56 family using the same e200z core. For precise substitutes, tell: package type (e.g., LQFP), flash size, RAM, needed peripherals, target speed, and whether you need cross‑vendor options.

MPC563MZP56 is an automotive 32‑bit MCU from the MPC56 family. Key features:
- Core: 32‑bit Power Architecture (e200z0‑based) for deterministic real‑time performance.
- Memory: On‑chip Flash and RAM with ECC and code protection; supports boot ROM and boot loader.
- Peripherals: Serial interfaces (CAN, LIN, SCI/UART, SPI, I2C); PWM/advanced PWM; multiple timers; ADCs (12‑bit) with multiple channels; eDMA; CRC; watchdog.
- Safety/reliability: Memory protection unit, ECC/parity, fault detection and safe boot options.
- Power/clock: Flexible clocking with multiple low‑power modes for efficiency.
- Development: In‑system programming and standard debug interfaces (JTAG/SW‑D), broad toolchain support.
- Automotive grade: AEC‑Q100 qualification and extended temperature range.
Note: exact counts (flash/RAM size, number of CAN/LIN channels, ADCs, etc.) vary by variant; consult the datasheet for MPC563MZP56 for precise numbers.

- Pin count: 56 pins (LQFP-56 package)
- Function: 32-bit microcontroller (Power Architecture) from the MPC56x/MPC563 family, used as an embedded automotive/industrial controller with on-chip flash, RAM, and peripherals.

Manufacturer: NXP Semiconductors (the MPC563MZP56 comes from the MPC56 family; originally Freescale, now part of NXP).
What kind of company: A Dutch multinational semiconductor company that designs and manufactures embedded processors, microcontrollers, and other integrated circuits for automotive, industrial, and consumer markets.

Main application areas: automotive control, industrial motor control, and instrumentation.
- Automotive: engine/transmission control units; electric/hybrid motor drive and inverter control; chassis/body electronics (ABS/ESP, HVAC, lighting); instrument clusters; telematics/gateway; in-vehicle networks (CAN/LIN).
- Industrial: servo/motor drives, robotics, CNC, PLC-based automation; power electronics and inverters; remote monitoring.
- Other: energy management, battery management, smart grid equipment.

MPC563MZP56 uses a 256-pin LQFP (Thin Quad Flat Pack) package.