Images are for reference only
S9S08DN32F2CLF
+BOMIC MCU 8BIT 32KB FLASH 48LQFP
-
ManufacturerNXP USA Inc.
-
Mfr. Part #S9S08DN32F2CLF
-
Datasheet S9S08DN32F2CLF DataSheet
-
Package LQFP-48
-
In Stock9651
365 Days Quality Guarantee
7*24 hours service quarantee
90-day after-sales guarantee
Genuine Product Guarantee
Specifications
| Attribute | Value |
| Supplier | NXP USA Inc. |
| Package | Tray |
| Series | S08 |
| ProductStatus | Active |
| CoreProcessor | S08 |
| CoreSize | 8-Bit |
| Speed | 40MHz |
| Connectivity | I²C, LINbus, SCI, SPI |
| Peripherals | LVD, POR, PWM, WDT |
| NumberofI/O | 39 |
| ProgramMemorySize | 32KB (32K x 8) |
| ProgramMemoryType | FLASH |
| EEPROMSize | 1K x 8 |
| RAMSize | 1.5K x 8 |
| Voltage-Supply(Vcc/Vdd) | 2.7V ~ 5.5V |
| DataConverters | A/D 16x12b |
| OscillatorType | Internal |
| OperatingTemperature | -40°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 48-LQFP |
Overview
Description
Key points:
- Memory: 32 KB flash program memory; RAM is a few kilobytes (exact size varies by variant).
- Peripherals: multiple serial interfaces (SCI/UART, I2C, SPI), ADC (12‑bit), timers, watchdog, plus basic low‑power modes.
- Debugging/PRG: supports in‑system programming and on‑chip debugging.
- Package: CLF denotes a specific package variant (pin count/footprint varies; check datasheet for details).
Typical uses: automotive body/industrial control, motor control, sensing, and other small embedded applications needing a compact, low‑power MCU.
For exact specs—RAM size, clock speed, voltage range, pinout, and package details—refer to the official S9S08DN32F2CLF datasheet and reference manual.
Equivalent
- MC9S08DN32 (Freescale/NXP)
- S9S08DN32F2 (same silicon, different packaging)
- S08DN32F2 (if available in your region/line)
Note: exact package, temperature rating, and revision differ. Use NXP cross-reference to confirm pinout and footprints before substituting.
Features
- 8-bit HCS08 CPU core, up to ~20 MHz operation.
- Memory: 32 KB Flash program memory; 2 KB RAM.
- Peripherals: 10-bit ADC (multiple channels), analog comparator; two 16-bit timers with PWM; one 8-bit timer.
- Serial comms: SCI/UART, SPI, I2C.
- Other: watchdog timer; interrupt system with vector table.
- Debug/in-system programming via Background Debug Mode (BDM).
- Power management: run, wait, and stop modes; voltage detector for brown-out protection.
- Operating voltage typically in the 1.8–3.6 V range (variant dependent).
- Package: CLF (32-pin) LQFP/QFN style.
Note: exact specifications (clock, memory, peripherals counts) can vary by revision; check the datasheet for the precise device variant.
Pinout
- Function: 8‑bit microcontroller (NXP/Freescale HCS08 core) with 32 KB flash and 2 KB RAM, intended for embedded control. Includes on‑chip peripherals such as serial communications (SCI), SPI/I2C, ADCs, timers, and GPIO for general-purpose control applications.
Manufacturer
- Company type: NXP is a Dutch multinational semiconductor company (headquartered in Eindhoven) that designs and manufactures embedded processors, microcontrollers, sensors, and secure connectivity solutions for automotive, industrial, and consumer markets.
Application
- Automotive body electronics (lighting control, door modules, sensor I/O)
- Industrial sensing and control (data acquisition, small PLC-like tasks)
- Consumer electronics and instrument panels
- Home/building automation (thermostats, smart switches, HMI)
- Small motor control and power management
- Portable/medical sensing devices (low-power embedded control)
Notes: This 8-bit MCU with 32 kB flash, multiple timers/ADC and serial interfaces (SCI, I2C, SPI) suits cost-sensitive embedded control in these areas.
