FM24C04B-G

The FM24C04B-G is a non-volatile memory device that utilizes ferroelectric technology to store data. It is a 4K-bit (512 x 8) I²C EEPROM, which offers advantages such as high endurance and fast write cycles, typically around 10 µs. This device retains data even when powered off, making it suitable for applications requiring data retention without continuous power supply.
Key features include:
- Interface: I²C, allowing for easy integration with various microcontrollers.
- Operating Voltage: Ranges from 1.8V to 5.5V, making it versatile for different voltage environments.
- Temperature Range: Typically operates from -40°C to 85°C, suitable for industrial applications.
- Endurance: Supports up to 10^14 write cycles and over 10 years of data retention.
The FM24C04B-G is ideal for applications such as configuration settings, calibration data, and other scenarios where reliable non-volatile storage is essential.

The FM24C04B-G is a 4Kb FRAM memory chip. Equivalent products include the MB85RC04, M24C04, and CY15B104K. These chips provide similar functionality in non-volatile memory but may differ in interfaces, voltage ranges, or speed. Always check specific datasheets for compatibility in your application.

The FM24C04B-G is a 4-kbit (512 x 8) serial EEPROM (Electrically Erasable Programmable Read-Only Memory) designed for low-power applications. Key features include:
1. Interface: Utilizes a Serial Peripheral Interface (SPI) for fast data communication.
2. Voltage Range: Operates within a voltage range of 2.7V to 5.5V, making it suitable for various applications.
3. Write Endurance: Supports a high endurance of up to 1 million write cycles per byte.
4. Data Retention: Ensures data retention for up to 100 years.
5. Speed: Offers fast access times with a maximum clock frequency of 20 MHz.
6. Low Power Consumption: Features low active, standby, and sleep current, making it energy-efficient.
7. Packages: Available in various package options, including SOIC and TSSOP, for flexible integration.
8. Multi-Device Support: Allows multiple devices on the same SPI bus with unique select lines.
These features make the FM24C04B-G ideal for applications in consumer electronics, industrial control, and automotive systems.

The FM24C04B-G is a 4Kb (512 x 8-bit) EEPROM memory device with a total of 8 pins. The pin count and their functions are as follows:
1. VCC: Power supply voltage (typically 2.7V to 3.6V).
2. GND: Ground reference.
3. SDA: Serial data line for data input/output.
4. SCL: Serial clock line used to synchronize data transmission.
5. WP: Write protect; used to enable or disable write operations.
6. A0: Device address pin, used to select one of multiple devices on the same bus (part of the I2C address).
7. A1: Another device address pin for additional address selection.
8. A2: Additional device address pin for further device selection.
The FM24C04B-G operates via an I2C interface, allowing for communication with microcontrollers and other devices.

The FM24C04B-G is manufactured by Fujitsu Microelectronics. Fujitsu is a prominent Japanese multinational information technology equipment and services company, known for designing a wide range of electronic components and semiconductor products, including memory devices like the FM24C04B-G.
The FM24C04B-G is a non-volatile memory device, specifically a FRAM (Ferroelectric RAM), which combines the advantages of traditional RAM and EEPROM. It is used in various applications requiring reliable data storage with fast write speeds and low power consumption. Fujitsu focuses on innovative solutions in areas such as microcontrollers, memory chips, and other semiconductor technologies, catering to industries like automotive, telecommunications, and consumer electronics.
Overall, Fujitsu Microelectronics is recognized for its commitment to research and development in the semiconductor sector, providing high-quality products that meet the evolving needs of modern technology.

The FM24C04B-G is a non-volatile serial EEPROM designed for applications requiring data retention without power. Its primary application areas include:
1. Consumer Electronics: Used in settings where configuration or calibration data must be stored, such as remote controls and appliances.
2. Industrial Equipment: Stores parameters and settings for control systems and automation devices.
3. Automotive Systems: Maintains configuration data in automotive electronics.
4. Smart Meters: Records usage data and configurations in energy metering systems.
5. Telecommunications: Stores firmware and configuration settings in network devices.
Its I2C interface allows easy integration into various electronic systems.

The FM24C04B-G is typically available in an 8-lead SOIC (Small Outline Integrated Circuit) package. This package type is designed for surface mounting and is commonly used in various electronic applications for memory storage.