2N7002E-T1-E3 vs 2N7002LT1G

This in-depth comparison of the 2N7002E-T1-E3 and 2N7002LT1G provides valuable insights into their specifications and key features. We cover important factors in detail, including RoHS compliance, REACH status, series, mounting style, package type, and other relevant characteristics. Presenting the differences side by side simplifies component selection, making it easier for you to select the best option for your specific application.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The 2N7002LT1G and 2N7002E-T1-E3 are both N-channel enhancement-mode MOSFETs in SOT-23 packages with matched voltage and current ratings, making them functionally interchangeable in most low-power switching and level-shifting applications. Designers should verify gate threshold voltage tolerances and RDS(on) characteristics against their specific circuit requirements before committing to a drop-in substitution.

Drain-Source Voltage Rating High match
Continuous Drain Current High match
Package Type High match
Gate Threshold Voltage Validation required

Review the critical differences →

Parts at a glance

Part A

2N7002E-T1-E3

Vishay Siliconix

Lifecycle
Active
Stock
7566 PCS
Package
SOT-23-3
Series
Transistors - FETs, MOSFETs - Single
+BOM RFQ
Part B

2N7002LT1G

onsemi

Lifecycle
Active
Stock
7047 PCS
Package
SOT-23-3
Series
Transistors - FETs, MOSFETs - Single
+BOM RFQ

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

RFQ Contact technical support

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification 2N7002E-T1-E3 2N7002LT1G
Part Status Active Active
FET Type N-Channel N-Channel
Technology MOSFET (Metal Oxide) MOSFET (Metal Oxide)
Drain to Source Voltage (Vdss) 60 V 60 V
Current - Continuous Drain(Id) @ 25°C 240mA (Ta) 115mA (Tc)
Drive Voltage(Max Rds On Min Rds On) 4.5V, 10V 5V, 10V
Rds On(Max) @ Id Vgs 3Ohm @ 250mA, 10V 7.5Ohm @ 500mA, 10V
Vgs(th)(Max) @ Id 2.5V @ 250µA 2.5V @ 250µA
Gate Charge(Qg)(Max) @ Vgs 0.6 nC @ 4.5 V -
Vgs(Max) ±20V ±20V
Input Capacitance(Ciss)(Max) @ Vds 21 pF @ 5 V 50 pF @ 25 V
Power Dissipation (Max) 350mW (Ta) 225mW (Ta)
Operating Temperature -55°C ~ 150°C (TJ) -55°C ~ 150°C (TJ)
Mounting Type Surface Mount Surface Mount
Compare RFQ